Руководство По Обслуживанию для Cisco Cisco TelePresence MX700

D15331.04 MX700 and MX800 Administrator Guide CE8.2, OCTOBER 2016.  

www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved. 

57

Cisco TelePresence MX700 and MX800

 Administrator Guide

Connect a camera

Typically, an external camera is 

connected to an HDMI input. 

In addition, you must connect the 

camera via an Ethernet switch to the 

video system’s Ethernet 2 or Ethernet 3 

port; or to the camera control DSUB-9 

port. The type of camera determines 

whether to use Ethernet or DSUB-9.

Connect a computer

Connect a computer to a video input in 

order to share content locally or with 

conference participants. The codec 

supports two computers simultaneously. 

Typically, computers are connected to 

Connector 3 (HDMI) or Connector 4 

(DVI-I). 

To get audio when using DVI-I, you must 

also connect the computer to one of the 

codec’s Audio Line inputs (Euroblock).

Analog video input

Connector 5 comprises two BNC 

sockets, and is used for S-Video or 

Composite video signals.

S-Video: Connect to both the Y and C 

connectors.

Composite: Connect to the Y connector.

About the video inputs

MX700 and MX800 has several input 

connectors. The following inputs are 

available for additional content sources:

•  Two HDMI inputs (video systems with 

a single camera) / One HDMI input 

(video systems with a dual camera)

•  One DVI-I input
•  One combined S-video/Composite 

video input

The DVI-I and combined S-Video/

Composite video inputs cannot be used 

simultaneously.

Typically, the inputs are used for 

computers, but you can also connect 

cameras or other types of video and 

content sources.

You can connect several 

external input sources 

to the video system 

simultaneously:

•  Three for single 

camera systems

•  Two for dual camera 

systems 

Sign in to the web 

interface and navigate to 

, to 

find the settings referred 

in this section.

Remove the video 

system’s left side cover 

to get access to the 

connectors. The cover is 

fastened with magnets.

Connector 4 (DVI-I)

Do not disconnect! 

Used for the integrated 

camera in a single 

camera system.

Do not disconnect! 

Used for the integrated 

cameras in a dual 

camera system. 

Connector 3 (HDMI)

Connector 2 (HDMI)

Connector 1 (HDMI)

Audio Line input 

(Euroblock, 3.5 mm)

Connector 5 

(S-Video/Composite)

Y 

C 

Connect input sources

(page 1 of 2)

Introduction

Configuration

Peripherals

Maintenance

System settings

Appendices



Peripherals