Руководство По Обслуживанию для Cisco Cisco TelePresence MX700

D15331.01 MX700 and MX800 Administrator Guide CE8.0, NOVEMBER 2015.  

www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved. 

106

Cisco TelePresence MX700 and MX800

Administrator Guide

Network [1] IEEE8021X Identity

Define the user name for 802.1X authentication.

Requires user role: ADMIN
Default value: ""

Value space: String (0, 64)

The user name for 802.1X authentication.

Network [1] IEEE8021X Password

Define the password for 802.1X authentication.

Requires user role: ADMIN
Default value: ""

Value space: String (0, 32)

The password for 802.1X authentication.

Network [1] IEEE8021X AnonymousIdentity

The 802.1X Anonymous ID string is to be used as unencrypted identity with EAP (Extensible 

Authentication Protocol) types that support different tunneled identity, like EAP-PEAP and 

EAP-TTLS. If set, the anonymous ID will be used for the initial (unencrypted) EAP Identity 

Request.

Requires user role: ADMIN
Default value: ""

Value space: String (0, 64)

TThe 802.1X Anonymous ID string.

Network [1] IEEE8021X Eap Md5

Define the Md5 (Message-Digest Algorithm 5) mode. This is a Challenge Handshake 

Authentication Protocol that relies on a shared secret. Md5 is a Weak security.

Requires user role: ADMIN
Default value: On

Value space: Off/On

Off: The EAP-MD5 protocol is disabled.
On: The EAP-MD5 protocol is enabled (default).

Network [1] IEEE8021X Eap Ttls

Define the TTLS (Tunneled Transport Layer Security) mode. Authenticates LAN clients 

without the need for client certificates. Developed by Funk Software and Certicom. Usually 

supported by Agere Systems, Proxim and Avaya.

Requires user role: ADMIN
Default value: On

Value space: Off/On

Off: The EAP-TTLS protocol is disabled.
On: The EAP-TTLS protocol is enabled (default).

Network [1] IEEE8021X Eap Tls

Enable or disable the use of EAP-TLS (Transport Layer Security) for IEEE802.1x 

connections. The EAP-TLS protocol, defined in RFC 5216, is considered one of the most 

secure EAP standards. LAN clients are authenticated using client certificates.

Requires user role: ADMIN
Default value: On

Value space: Off/On

Off: The EAP-TLS protocol is disabled.
On: The EAP-TLS protocol is enabled (default).

Introduction

Configuration

Peripherals

Maintenance

System settings

Appendices



System settings