Руководство По Обслуживанию для Cisco Cisco TelePresence MX700
D15331.01 MX700 and MX800 Administrator Guide CE8.0, NOVEMBER 2015.
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
122
Cisco TelePresence MX700 and MX800
Administrator Guide
RTP settings
RTP Ports Range Start
Define the first port in the range of RTP ports.
As default, the system is using the UDP ports in the range 2326 to 2487 for RTP and RTCP
As default, the system is using the UDP ports in the range 2326 to 2487 for RTP and RTCP
media data. Each media channel is using two adjacent ports for RTP and RTCP. The default
number of ports required in the UDP port range is based on the number of simultaneous
calls that the endpoint is capable of.
NOTE: Restart the system for any change to this setting to take effect.
NOTE: Restart the system for any change to this setting to take effect.
Requires user role: ADMIN
Default value: 2326
Default value: 2326
Value space: Integer (1024..65438)
Set the first port in the range of RTP ports.
RTP Ports Range Stop
Define the last port in the range of RTP ports.
As default, the system is using the UDP ports in the range 2326 to 2487 for RTP and RTCP
As default, the system is using the UDP ports in the range 2326 to 2487 for RTP and RTCP
media data. Each media channel is using two adjacent ports for RTP and RTCP. The default
number of ports required in the UDP port range is based on the number of simultaneous
calls that the endpoint is capable of.
NOTE: Restart the system for any change to this setting to take effect.
NOTE: Restart the system for any change to this setting to take effect.
Requires user role: ADMIN
Default value: 2486
Default value: 2486
Value space: Integer (1120..65535)
Set the last port in the range of RTP ports.
Introduction
Configuration
Peripherals
Maintenance
System settings
Appendices
System settings