Руководство По Обслуживанию для Cisco Cisco TelePresence MX700
D15331.01 MX700 and MX800 Administrator Guide CE8.0, NOVEMBER 2015.
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
83
Cisco TelePresence MX700 and MX800
Administrator Guide
Audio Input HDMI [n] Mode
This setting applies to HDMI [2..3] for single camera systems, and to HDMI [3] for dual
camera systems.
Define if the audio channels on the HDMI input shall be enabled. The HDMI inputs have two
Define if the audio channels on the HDMI input shall be enabled. The HDMI inputs have two
audio channels.
Requires user role: ADMIN
Default value: On
Default value: On
Value space: Off/On
Off: Disable audio on the HDMI input.
On: Enable audio on the HDMI input.
On: Enable audio on the HDMI input.
Audio Input Line [1..4] Equalizer ID
Select the equalizer ID of the audio source that is connected to the line input.
Requires user role: ADMIN
Default value: 1
Default value: 1
Value space: Integer (1..8)
Set the equalizer ID.
Audio Input Line [1..4] Equalizer Mode
Define the equalizer mode for the audio source that is connected to the line input.
Requires user role: ADMIN
Default value: Off
Default value: Off
Value space: Off/On
Off: No equalizer.
On: Enable the equalizer for the audio source that is connected to the line input.
On: Enable the equalizer for the audio source that is connected to the line input.
Audio Input Line [1..4] VideoAssociation MuteOnInactiveVideo
The audio source can be associated with a video source on the video input connector, and
you can determine whether to play or mute audio depending on whether the video source is
presented or not. By default, audio is not muted.
Requires user role: ADMIN
Default value: Line [1, 2]: On Line[3, 4]: Off
Default value: Line [1, 2]: On Line[3, 4]: Off
Value space: Off/On
Off: The audio source is not associated with a video source. The audio will be played
locally and to far end regardless of whether the video source is presented.
On: The audio source is associated with a video source. The audio will be played (locally
On: The audio source is associated with a video source. The audio will be played (locally
and to far end) when the associated video source is presented. The audio will be muted
when the video source is not presented.
Audio Input Line [1..4] VideoAssociation VideoInputSource
The audio source can be associated with a video source on the video input connector.
Requires user role: ADMIN
Default value: Line [1, 2]: 4 Line[3, 4]: 1
Default value: Line [1, 2]: 4 Line[3, 4]: 1
Value space: 1/2/3/4/5
Select the video input connector to associate the audio source with.
Audio Input Line [1..4] Channel
Define whether the audio source on the line input is a mono signal or part of a multichannel
signal.
Requires user role: ADMIN
Default value: Left
Default value: Left
Value space: Left/Mono/Right
Left: The Audio Line input signal is the left channel of a stereo signal.
Mono: The Audio Line input signal is a mono signal.
Right: The Audio Line input signal is the right channel of a stereo signal.
Mono: The Audio Line input signal is a mono signal.
Right: The Audio Line input signal is the right channel of a stereo signal.
Introduction
Configuration
Peripherals
Maintenance
System settings
Appendices
System settings