Руководство По Обслуживанию для Cisco Cisco TelePresence MX700
D15119.06 MX700 and MX800 Administrator Guide TC7.3, OCTOBER 2015.
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
67
Cisco TelePresence MX700 and MX800
Administrator Guide
Audio Output HDMI [2] Mode
This setting only applies to MX800 Single.
Determine if the audio channel on the HDMI output connector shall be enabled.
Determine if the audio channel on the HDMI output connector shall be enabled.
Requires user role: ADMIN
Value space: <Off/On>
Value space: <Off/On>
Off: Disable the audio channel on the HDMI output.
On: Enable the audio channel on the HDMI output.
On: Enable the audio channel on the HDMI output.
Example:
Audio Output HDMI 2 Mode: Off
Audio Output Line [1..6] Channel
Define whether the Audio Line output is a mono signal or part of a multichannel signal.
Requires user role: ADMIN
Value space: <Right/Left/Mono>
Value space: <Right/Left/Mono>
Right: The Audio Line output signal is the right channel of a stereo signal.
Left: The Audio Line output signal is the left channel of a stereo signal.
Mono: The Audio Line output signal is a mono signal.
Left: The Audio Line output signal is the left channel of a stereo signal.
Mono: The Audio Line output signal is a mono signal.
Example:
Audio Output Line 1 Channel: left
Audio Output Line [1..6] Equalizer ID
Select the audio output line equalizer ID.
Requires user role: ADMIN
Value space: <1..8>
Value space: <1..8>
Range: Select EqualizerID 1 to 8.
Example:
Audio Output Line 1 Equalizer ID: 1
Audio Output Line [1..6] Equalizer Mode
Set the audio output line equalizer mode.
Requires user role: ADMIN
Value space: <Off/On>
Value space: <Off/On>
Off: No equalizer.
On: Enable the equalizer for the audio output line.
On: Enable the equalizer for the audio output line.
Example:
Audio Output Line 1 Equalizer Mode: Off
Audio Output Line [1..6] Level
Define the audio level on the line output connector.
See the Audio Level table in the Physical Interface Guide for Cisco TelePresence SX80 for a
See the Audio Level table in the Physical Interface Guide for Cisco TelePresence SX80 for a
complete overview of the menu values represented in dB.
Requires user role: ADMIN
Value space: <-24..0>
Value space: <-24..0>
Range: Select a value between -24 and 0, in steps of 1 dB.
Example:
Audio Output Line 1 Level: -10
Audio Output Line [1..6] Mode
Set the audio output line mode.
Requires user role: ADMIN
Value space: <Off/On>
Value space: <Off/On>
Off: Disable the Audio Line output.
On: Enable the Audio Line output.
On: Enable the Audio Line output.
Example:
Audio Output Line 1 Mode: On
Contents
Introduction
Web interface
System settings
Setting passwords
Appendices
System settings