Руководство По Обслуживанию для Cisco Cisco TelePresence MX700

D15119.06 MX700 and MX800 Administrator Guide TC7.3, OCTOBER 2015.

Cisco TelePresence MX700 and MX800

Administrator Guide

Conference [1..1] DefaultCall Protocol

Set the Default Call Protocol to be used when placing calls from the system.

Requires user role: ADMIN
Value space: <Auto/H323/Sip/H320>

Auto: Enables auto-selection of the call protocol based on which protocols are available.

If multiple protocols are available, the order of priority is: 1) SIP; 2) H323; 3) H320. If the

system cannot register, or the call protocol is not enabled, the auto-selection chooses H323.
H323: All calls are set up as H.323 calls.
Sip: All calls are set up as SIP calls.
H320: All calls are set up as H.320 calls (only applicable if connected to a Cisco

TelePresence ISDN Link gateway).

Example:

Conference 1 DefaultCall Protocol: Auto

Conference [1..1] DefaultCall Rate

Set the Default Call Rate to be used when placing calls from the system.

Requires user role: ADMIN
Value space: <64..6000>

Range: Select a value between 64 and 6000 kbps.

Example:

Conference 1 DefaultCall Rate: 1920

Conference [1..1] MaxTransmitCallRate

Specify the maximum transmit bit rate to be used when placing or receiving calls. Note that this

is the maximum bit rate for each individual call; use the Conference MaxTotalTransmitCallRate

setting to set the aggregated maximum for all simultaneous active calls.

Requires user role: ADMIN
Value space: <64..6000>

Range: Select a value between 64 and 6000 kbps.

Example:

Conference 1 MaxTransmitCallRate: 6000

Conference [1..1] MaxReceiveCallRate

Specify the maximum receive bit rate to be used when placing or receiving calls. Note that this

is the maximum bit rate for each individual call; use the Conference MaxTotalReceiveCallRate

setting to set the aggregated maximum for all simultaneous active calls.

Requires user role: ADMIN
Value space: <64..6000>

Range: Select a value between 64 and 6000 kbps.

Example:

Conference 1 MaxReceiveCallRate: 6000

Conference [1..1] MaxTotalTransmitCallRate

This configuration applies when using a video system's built-in MultiSite feature (optional) to

host a multipoint video conference.
Specify the maximum overall transmit bit rate allowed. The bit rate will be divided fairly among

all active calls at any time. This means that the individual calls will be up-speeded or down-

speeded as appropriate when someone leaves or enters a multipoint conference, or when a call

is put on hold (suspended) or resumed.
The maximum transmit bit rate for each individual call is defined in the Conference

MaxTransmitCallRate setting.

Requires user role: ADMIN
Value space: <64..10000>

Range: Select a value between 64 and 10000.

Example:

Conference 1 MaxTotalTransmitCallRate: 10000

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

System settings