Руководство По Обслуживанию для Cisco Cisco TelePresence MX700

D15331.02 MX700 and MX800 Administrator Guide CE8.1, APRIL 2016.  

www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved. 

110

Cisco TelePresence MX700 and MX800

Administrator Guide

GPIO settings

GPIO Pin [1..4] Mode

The four GPIO pins are configured individually. The state can be retrieved by "xStatus GPIO 

Pin [1..4] State". The default pin state is High (+12 V). When activated as output, they are set 

to 0 V. To activate them as input, they must be pulled down to 0 V.

Requires user role: ADMIN
Default value: InputNoAction

Value space: InputNoAction/OutputManualState/OutputInCall/OutputMicrophonesMuted/

OutputPresentationOn/OutputAllCallsEncrypted/OutputStandbyActive/

InputMuteMicrophones

InputNoAction: The pin state can be set, but no operation is performed.
OutputManualState: The pin state can be set by "xCommand GPIO ManualState Set 

PinX: <High/Low>" (to +12 V or 0 V, respectively).
OutputInCall: The pin is activated when in call, deactivated when not in call.
OutputMicrophonesMuted: The pin is activated when microphones are muted, 

deactivated when not muted.
OutputPresentationOn: The pin is activated when presentation is active, deactivated 

when presentation is not active.
OutputAllCallsEncrypted: The pin is activated when all calls are encrypted, deactivated 

when one or more calls are not encrypted.
OutputStandbyActive: The pin is activated when the system is in standby mode, 

deactivated when no longer in standby.
InputMuteMicrophones: When the pin is activated (0 V), the microphones will be muted. 

When deactivated (+12 V), the microphones are unmuted.

Introduction

Configuration

Peripherals

Maintenance

System settings

Appendices



System settings