Руководство По Обслуживанию для Cisco Cisco TelePresence MX700

D15119.01 MX700 and MX800 Administrator Guide TC7.1.2, JUNE 2014.

Cisco TelePresence MX700 and MX800

Administrator Guide

Audio Output Line [1..6] Equalizer ID

Select the audio output line equalizer ID.

Requires user role: ADMIN
Value space: <1..8>

Range: Select EqualizerID 1 to 8.

Example:

Audio Output Line 1 Equalizer ID: 1

Audio Output Line [1..6] Equalizer Mode

Set the audio output line equalizer mode.

Requires user role: ADMIN
Value space: <Off/On>

Off: No equalizer.
On: Enable the equalizer for the audio output line.

Example:

Audio Output Line 1 Equalizer Mode: Off

Audio Output Line [1..6] Level

Define the output level of the Audio Output Line connector, in steps of 1 dB.
See the Audio Level tables in the Physical Interfaces Guide for the codec for a complete

overview of the menu values represented in dB.

Requires user role: ADMIN
Value space: <-24..0>

Range: Select a value from -24 to 0 dB.

Example:

Audio Output Line 1 Level: -10

Audio Output Line [1..6] Mode

Set the audio output line mode.

Requires user role: ADMIN
Value space: <Off/On>

Off: Disable the Audio Line output.
On: Enable the Audio Line output.

Example:

Audio Output Line 1 Mode: On

Audio Microphones Mute Enabled

Determine whether audio-mute is allowed or not. The default value is True.

Requires user role: ADMIN
Value space: <True/InCallOnly>

True: Muting of audio is always available.
InCallOnly: Muting of audio is only available when the device is in a call. When Idle it is not

possible to mute the microphone. This is useful when an external telephone service/audio

system is connected via the codec and is to be available when the codec is not in a call.

When set to InCallOnly this will prevent the audio-system from being muted by mistake.

Example:

Audio Microphones Mute Enabled: True

Audio SoundsAndAlerts KeyTones Mode

The system can be configured to make a keyboard click sound effect (key tone) when typing

text or numbers on the Touch controller.

Requires user role: USER
Value space: <Off/On>

Off: No key tones will be played when you type.
On: You will hear key tones when you type.

Example:

Audio SoundsAndAlerts KeyTones Mode: Off

Audio SoundsAndAlerts RingTone

This setting defines which ringtone to use for incoming calls. You need to enter the exact name

of the ringtone. You can find the available ringtones the following ways.
Web interface: On the Configuration > Personalization page.
Touch controller: On the Ringtone & Sound panel of the Settings menu. This panel is either

in the open part of the Settings menu, or included in the password protected Administrator

menu. The UserInterface UserPreference setting defines which panels will be in the password

protected area.

Requires user role: USER
Value space: <S: 1, 100>

Format: String with a maximum of 100 characters.

Example:

Audio SoundsAndAlerts RingTone: "Sunrise"

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

System settings