Руководство По Обслуживанию для Cisco Cisco TelePresence MX700

D14850.10 MX200 and MX300 Administrator Guide TC7.2, AUGUST 2014.  

www.cisco.com — Copyright © 2011–2014 Cisco Systems, Inc. All rights reserved. 

102

Cisco TelePresence MX200 and MX300  

Administrator Guide

Video Input DVI [1] Type

The official DVI standard supports both digital and analog signals. In most cases the default 

AutoDetect setting can detect whether the signal is analog RGB or digital. However, in some 

rare cases when DVI-I cables are used (these cables can carry both the analog and digital 

signals) the auto detection fails. This setting makes it possible to override the AutoDetect and 

select the correct DVI video input.

Requires user role: ADMIN
Value space: <AutoDetect/Digital/AnalogRGB/AnalogYPbPr>

AutoDetect: Set to AutoDetect to automatically detect if the signal is analog RGB or digital. 
Digital: Set to Digital to force the DVI video input to Digital when using DVI-I cables with both 

analog and digital pins and AutoDetect fails. 
AnalogRGB: Set to AnalogRGB to force the DVI video input to AnalogRGB when using DVI-I 

cables with both analog and digital pins and AutoDetect fails. 
AnalogYPbPr: Set to AnalogYPbPr to force the DVI video input to AnalogYPbPr, as the 

component (YPbPr) signal cannot be auto detected. 

Example:

 Video Input DVI 1 Type: AutoDetect

Video Input Source [1..2] Name

Enter a name for the video input source.

Requires user role: ADMIN
Value space: <S: 0, 50>

Format: String with a maximum of 50 characters. 

Example:

 Video Input Source 1 Name: ""

Video Input Source [1] Connector

Select which video input connector to be active on video input source 1.

Requires user role: ADMIN
Value space: <DVI>

DVI: Select DVI when you want to use the DVI as input source 1.

Example:

 Video Input Source 1 Connector: DVI

Video Input Source [2] Connector

Select which video input connector to be active on video input source 2.

Requires user role: ADMIN
Value space: <CAMERA>

CAMERA: Select CAMERA when you want to use the camera as input source 2.

Example:

 Video Input Source 2 Connector: CAMERA

Video Input Source [1..2] Type

Set which type of input source is connected to the video input.

Requires user role: ADMIN
Value space: <other/camera/PC/DVD/document_camera/whiteboard>

other: Use this when none of the below options match. 
camera: Use this when a camera is connected to the video input.
PC: Use this when a computer is connected to the video input.
DVD: Use this when a DVD player is connected to the video input.
document_camera: Use this when a document camera is connected to the video input.
whiteboard: Use this when a whiteboard camera is connected to the video input.

Example:

 Video Input Source 1 Type: PC

Contents

Introduction

System settings

Setting passwords

Appendices

Web interface

System settings