Руководство По Обслуживанию для Cisco Cisco TelePresence MX700

D14850.10 MX200 and MX300 Administrator Guide TC7.2, AUGUST 2014.  

www.cisco.com — Copyright © 2011–2014 Cisco Systems, Inc. All rights reserved. 

105

Cisco TelePresence MX200 and MX300  

Administrator Guide

Video MainVideoSource

Define which video input source shall be used as the main video source. The video input source 

is configured with the "Video Input Source [1..n] Connector" setting.

Requires user role: USER
Value space: <1/2>

Range: Select the source to be used as the main video source.

Example:

 Video MainVideoSource: 2

Video Layout DisableDisconnectedLocalOutputs

Determine whether or not the built-in layout engine shall set layouts on local outputs that have 

no monitor connected.

Requires user role: ADMIN
Value space: <Off/On>

Off: The built-in layout engine sets layout on all local outputs, also the ones not having any 

monitor connected.
On: The built-in layout engine does only set layout on local outputs having a monitor 

connected.

Example:

 Video Layout DisableDisconnectedLocalOutputs: On

Video Layout LocalLayoutFamily

Select which video layout family to use locally.

Requires user role: ADMIN
Value space: <Auto/FullScreen/Equal/PresentationSmallSpeaker/PresentationLargeSpeaker/

Prominent/Overlay/Single>

Auto: The default layout family, as given in the layout database provided by the system, will 

be used as the local layout. 
FullScreen: The FullScreen layout family will be used as the local layout. It means that 

the active speaker or presentation will be shown in full screen. Using this value is not 

recommended as from TC6.0.
Equal: The Equal layout family will be used as the local layout. All videos have equal size, as 

long as there is space enough on the screen. 
PresentationSmallSpeaker: The PresentationSmallSpeaker layout family will be used as the 

local layout. Using this value is not recommended as from TC6.0.
PresentationLargeSpeaker: The PresentationLargeSpeaker layout family will be used as the 

local layout. Using this value is not recommended as from TC6.0.
Prominent: The Prominent layout family will be used as the local layout. The active speaker, 

or the presentation if present, will be a large picture, while the other participants will be small 

pictures. Transitions between active speakers are voice switched.
Overlay: The Overlay layout family will be used as the local layout. The active speaker, or the 

presentation if present, will be shown in full screen, while the other participants will be small 

pictures-in-picture (PiP). Transitions between active speakers are voice switched.
Single: The active speaker, or the presentation if present, will be shown in full screen. The 

other participants are not shown. Transitions between active speakers are voice switched.

Example:

 Video Layout LocalLayoutFamily: Auto

Video Layout PresentationDefault View

Determine how the presentation will show on screen when you start sharing a presentation.

Requires user role: ADMIN
Value space: <Default/Minimized/Maximized>

Default: The presentation is a part of the layout.
Minimized: The presentation starts up in PIP mode.
Maximized: The presentation starts up in full screen mode.

Example:

 Video Layout PresentationDefault View: Default

Contents

Introduction

System settings

Setting passwords

Appendices

Web interface

System settings