Руководство По Обслуживанию для Cisco Cisco TelePresence MX700

D14850.10 MX200 and MX300 Administrator Guide TC7.2, AUGUST 2014.  

www.cisco.com — Copyright © 2011–2014 Cisco Systems, Inc. All rights reserved. 

20

Cisco TelePresence MX200 and MX300  

Administrator Guide

Snapshots from the video system

Far end snapshots

Capturing snapshots

The snapshot feature, which is disabled by default, allows 

snapshots captured by the video system to be displayed 

on the Call Control page. Captures from the video system’s 

camera as well as from its presentation channel will be 

displayed.

This feature might come in handy when administering the 

video system from a remote location, e.g. to check the 

camera view.

To use web snapshots you have to sign in with ADMIN 

credentials.

Enabling the snapshot feature

The snapshot feature is disabled by default. The feature must 

be enabled using the web interface

.

Web interface: 

•  Go to the 

 tab and select 

•  Navigate to 

 and choose 

On.

•  Click 

 for the change to take effect. 

Far end snapshots while in a call

While in a call, snapshots of the remote participant’s main 

camera and presentation channel (far end) will be captured 

and displayed as shown in the illustration. The snapshots are 

updated approximately every 30 seconds.

Far end snapshots are captured even if web 

snapshots are disallowed on the far end video 

system. Web snapshots are prohibited only for 

encrypted calls.

Take live snapshots

While the 

 box is checked, 

snapshots are captured by the video 

system (main source and presentation 

source) approximately every two seconds.

Click the snapshot in order 

to see a larger image.

Navigate to: Call Control

Contents

Introduction

System settings

Setting passwords

Appendices

Web interface

Web interface