Руководство По Обслуживанию для Cisco Cisco TelePresence MX700

D14850.10 MX200 and MX300 Administrator Guide TC7.2, AUGUST 2014.

Cisco TelePresence MX200 and MX300

Administrator Guide

Network [1..1] IEEE8021X Eap Ttls

Set the TTLS (Tunneled Transport Layer Security) mode. Authenticates LAN clients without the

need for client certificates. Developed by Funk Software and Certicom. Usually supported by

Agere Systems, Proxim and Avaya.

Requires user role: ADMIN
Value space: <Off/On>

Off: The EAP-TTLS protocol is disabled.
On: The EAP-TTLS protocol is enabled (default).

Example:

Network 1 IEEE8021X Eap Ttls: On

Network [1..1] IEEE8021X Eap Tls

Enable or disable the use of EAP-TLS (Transport Layer Security) for IEEE802.1x connections.

The EAP-TLS protocol, defined in RFC 5216, is considered one of the most secure EAP

standards. LAN clients are authenticated using client certificates.

Requires user role: ADMIN
Value space: <Off/On>

Off: The EAP-TLS protocol is disabled.
On: The EAP-TLS protocol is enabled (default).

Example:

Network 1 IEEE8021X Eap Tls: On

Network [1..1] IEEE8021X Eap Peap

Set the Peap (Protected Extensible Authentication Protocol) mode. Authenticates LAN clients

without the need for client certificates. Developed by Microsoft, Cisco and RSA Security.

Requires user role: ADMIN
Value space: <Off/On>

Off: The EAP-PEAP protocol is disabled.
On: The EAP-PEAP protocol is enabled (default).

Example:

Network 1 IEEE8021X Eap Peap: On

Network [1..1] MTU

Set the Ethernet MTU (Maximum Transmission Unit).

Requires user role: ADMIN
Value space: <576..1500>

Range: Select a value from 576 to 1500 bytes.

Example:

Network 1 MTU: 1500

Network [1..1] Speed

Set the Ethernet link speed.

Requires user role: ADMIN
Value space: <Auto/10half/10full/100half/100full/1000full>

Auto: Autonegotiate link speed.
10half: Force link to 10 Mbps half-duplex.
10full: Force link to 10 Mbps full-duplex.
100half: Force link to 100 Mbps half-duplex.
100full: Force link to 100 Mbps full-duplex.
1000full: Force link to 1 Gbps full-duplex.

Example:

Network 1 Speed: Auto

Network [1..1] TrafficControl Mode

Set the network traffic control mode to decide how to control the video packets transmission

speed.

Requires user role: ADMIN
Value space: <Off/On>

Off: Transmit video packets at link speed.
On: Transmit video packets at maximum 20 Mbps. Can be used to smooth out bursts in the

outgoing network traffic.

Example:

Network 1 TrafficControl: On

Contents

Introduction

System settings

Setting passwords

Appendices

Web interface

System settings