Руководство По Обслуживанию для Cisco Cisco TelePresence MX700

D14850.13 MX200 and MX300 Administrator Guide TC7.3, OCTOBER 2015.

Cisco TelePresence MX200 and MX300

Administrator Guide

Conference settings

Conference [1..1] ActiveControl Mode

Active control is a feature that allows conference participants to administer a conference on

Cisco TelePresence Server using the video system's interfaces (not available from the TRC5

remote control and on-screen display). Each user can see the participant list, change video

layout, disconnect participants, etc. from the interface. The active control feature is enabled

by default, provided that it is supported by the infrastructure (Cisco Unified Communications

Manager (CUCM) version 9.1.2 or newer, Cisco TelePresence Video Communication Server

(VCS) version X8.1 or newer). Change this setting if you want to disable the active control

features.

Requires user role: ADMIN
Value space: <Auto/Off>

Auto: Active control is enabled when supported by the infrastructure.
Off: Active control is disabled.

Example:

Conference ActiveControl Mode: Auto

Conference [1..1] CallProtocolIPStack

Select if the system should enable IPv4, IPv6, or dual IP stack on the call protocol (SIP, H323).

Requires user role: ADMIN
Value space: <Dual/IPv4/IPv6>

Dual: Enables both IPv4 and IPv6 for the call protocol.
IPv4: When set to IPv4, the call protocol will use IPv4.
IPv6: When set to IPv6, the call protocol will use IPv6.

Example:

Conference 1 CallProtocolIPStack: Dual

Conference [1..1] TelephonyPrefix

Enter the prefix to be used for telephony calls.

Requires user role: ADMIN
Value space: <S: 0, 80>

Format: String with a maximum of 80 characters.

Example:

Conference 1 TelephonyPrefix: "520"

Conference [1..1] AutoAnswer Mode

Set the auto answer mode. Use the Conference AutoAnswer Delay setting if you want the

system to wait a number of seconds before answering the call, and use the Conference

AutoAnswer Mute setting if you want your microphone to be muted when the call is answered.

Requires user role: ADMIN
Value space: <Off/On>

Off: You must answer incomming calls manually by tapping Answer on the Touch controller.
On: The system automatically answers incoming calls, except if you are already in a call. You

must always answer or decline incoming calls manually when you are already engaged in a

call.

Example:

Conference 1 AutoAnswer Mode: Off

Conference [1..1] AutoAnswer Mute

Determine if the microphone shall be muted when an incoming call is automatically answered.

Requires that AutoAnswer Mode is switched on.

Requires user role: ADMIN
Value space: <Off/On>

Off: The incoming call will not be muted.
On: The incoming call will be muted when automatically answered.

Example:

Conference 1 AutoAnswer Mute: Off

Conference [1..1] AutoAnswer Delay

Define how long (in seconds) an incoming call has to wait before it is answered automatically by

the system. Requires that AutoAnswer Mode is switched on.

Requires user role: ADMIN
Value space: <0..50>

Range: Select a value between 0 and 50 seconds.

Example:

Conference 1 AutoAnswer Delay: 0

Contents

Introduction

System settings

Setting passwords

Appendices

Web interface

System settings