Руководство По Обслуживанию для Cisco Cisco TelePresence MX700

D14850.08 MX200 and MX300 Administrator Guide TC7.0, DECEMBER 2013.  

www.cisco.com — Copyright © 2011–2013 Cisco Systems, Inc. All rights reserved. 

84

Cisco TelePresence MX200 and MX300  

Administrator Guide

SIP settings

SIP ANAT

ANAT (Alternative Network Address Types) enables media negotiation for multiple addresses 

and address types, as specified in RFC 4091.

Requires user role: ADMIN
Value space: <Off/On>

Off: Disable ANAT.
On: Enable ANAT.

Example:

 SIP ANAT: Off

SIP AuthenticateTransferror

Not applicable in this version.

SIP ListenPort

Turn on or off the listening for incoming connections on the SIP TCP/UDP ports. If turned 

off, the endpoint will only be reachable through the SIP registrar (CUCM or VCS). It is 

recommended to leave this setting at its default value.

Requires user role: ADMIN
Value space: <On/Off>

On: Listening for incoming connections on the SIP TCP/UDP ports is turned on.
Off: Listening for incoming connections on the SIP TCP/UDP ports is turned off.

Example:

 SIP ListenPort: On

SIP PreferredIPMedia

Define the preferred IP version for sending and receiving media (audio, video, data). Only 

applicable when both Network IPStack and Conference CallProtocolIPStack are set to Dual, and 

the network does not have a mechanism for choosing the preferred IP version.

Requires user role: ADMIN
Value space: <IPv4/IPv6>

IPv4: The preferred IP version for media is IPv4.
IPv6: The preferred IP version for media is IPv6.

Example:

 SIP PreferredIPMedia: IPv4

SIP PreferredIPSignaling

Define the preferred IP version for signaling (audio, video, data). Only applicable when both 

Network IPStack and Conference CallProtocolIPStack are set to Dual, and the  network does 

not have a mechanism for choosing the preferred IP version. It also determines the priority of 

the A/AAAA lookups in DNS, so that the preferred IP version is used for registration.

Requires user role: ADMIN
Value space: <IPv4/IPv6>

IPv4: The preferred IP version for signaling is IPv4.
IPv6: The preferred IP version for signaling is IPv6.

Example:

 SIP PreferredIPSignaling: IPv4

SIP OCSP Mode

Not applicable in this version.

SIP OCSP DefaultResponder

Not applicable in this version.

Contents

Introduction

System settings

Setting passwords

Appendices

Web interface

System settings