Руководство По Обслуживанию для Cisco Cisco TelePresence MX700

D14850.07 MX Series Administrator Guide TC6.3, OCTOBER 2013.  

www.cisco.com — Copyright © 2011–2013 Cisco Systems, Inc. All rights reserved. 

54

Cisco TelePresence MX Series  

Administrator Guide

Audio settings

Audio InternalSpeaker Mode

Set the internal loudspeaker mode.

Requires user role: ADMIN
Value space: <Off/On>

Off: The internal speakers are disabled.
On: The internal speakers are enabled.

Example:

 Audio InternalSpeaker Mode: On

Audio Microphones Mute Enabled

Determine whether audio-mute is allowed or not. The default value is True.

Requires user role: ADMIN
Value space: <True/InCallOnly>

True: Muting of audio is always available.
InCallOnly: Muting of audio is only available when the device is in a call. When Idle it is not 

possible to mute the microphone. This is useful when an external telephone service/audio 

system is connected via the codec and is to be available when the codec is not in a call. 

When set to InCallOnly this will prevent the audio-system from being muted by mistake.

Example:

 Audio Microphones Mute Enabled: True

Audio SoundsAndAlerts KeyTones Mode

The system can be configured to make a keyboard click sound effect (key tone) when typing 

text or numbers on a Touch controller.

Requires user role: USER
Value space: <Off/On>

Off: No key tones will be played when you type.
On: You will hear key tones when you type.

Example:

 Audio SoundsAndAlerts KeyTones Mode: Off

Audio SoundsAndAlerts RingTone

Select the ring tone for incoming calls.

Requires user role: USER
Value space: <Marbles/IceCrystals/Polaris/Alert/Discreet/Fantasy/Jazz/Nordic/Echo/Rhythmic>

Range: Select a tone from the list of ring tones.

Example:

 Audio SoundsAndAlerts RingTone: Jazz

Audio SoundsAndAlerts RingVolume

Sets the ring volume for an incoming call.

Requires user role: USER
Value space: <0..100>

Range: The value goes in steps of 5 from 0 to 100 (from -34.5 dB to 15 dB). Volume 0 = Off.

Example:

 Audio SoundsAndAlerts RingVolume: 50

Audio Volume

Adjust the speaker volume.

Requires user role: USER
Value space: <0..100>

Range: The value must be between 0 and 100. The values from 1 to 100 correspond to the 

range from -34.5 dB to 15 dB (0.5 dB steps). The value 0 means that the audio is switched 

off.

Example:

 Audio Volume: 70

Contents

Introduction

System settings

Setting passwords

Appendices

Web interface

System settings