Руководство По Обслуживанию для Cisco Cisco TelePresence MX700

D14850.07 MX Series Administrator Guide TC6.3, OCTOBER 2013.

Cisco TelePresence MX Series

Administrator Guide

Conference [1..1] VideoBandwidth Mode

Set the conference video bandwidth mode.

Requires user role: ADMIN
Value space: <Dynamic/Static>

Dynamic: The available transmit bandwidth for the video channels are distributed among the

currently active channels. If there is no presentation, the main video channels will use the

bandwidth of the presentation channel.
Static: The available transmit bandwidth is assigned to each video channel, even if it is not

active.

Example:

Conference 1 VideoBandwidth Mode: Dynamic

Conference [1..1] VideoBandwidth MainChannel Weight

The available transmit video bandwidth is distributed on the main channel and presentation

channel according to "MainChannel Weight" and "PresentationChannel Weight". If the main

channel weight is 2 and the presentation channel weight is 1, then the main channel will use

twice as much bandwidth as the presentation channel.

Requires user role: ADMIN
Value space: <1..10>

Range: 1 to 10.

Example:

Conference 1 VideoBandwidth MainChannel Weight: 5

Conference [1..1] VideoBandwidth PresentationChannel Weight

The available transmit video bandwidth is distributed on the main channel and presentation

channel according to "MainChannel Weight" and "PresentationChannel Weight". If the main

channel weight is 2 and the presentation channel weight is 1, then the main channel will use

twice as much bandwidth as the presentation channel.

Requires user role: ADMIN
Value space: <1..10>

Range: 1 to 10.

Example:

Conference 1 VideoBandwidth PresentationChannel Weight: 5

Conference [1..1] Presentation Policy

Control how the presentation service is to be performed.

Requires user role: ADMIN
Value space: <LocalRemote/LocalOnly>

LocalRemote: The presentation will be shown locally and sent to remote side.
LocalOnly: The presentation will only be shown locally.

Example:

Conference 1 Presentation Policy: LocalRemote

Conference [1..1] Presentation RelayQuality

This configuration applies to video systems that are using the built-in MultiSite feature (optional)

to host a multipoint video conference. When a remote user shares a presentation, the video

system (codec) will transcode the presentation and send it to the other participants in the

multipoint conference. The RelayQuality setting specifies whether to give priority to high frame

rate or to high resolution for the presentation source.

Requires user role: ADMIN
Value space: <Motion/Sharpness>

Motion: Gives the highest possible frame rate. Used when there is a need for higher frame

rates, typically when there is a lot of motion in the picture.
Sharpness: Gives the highest possible resolution. Used when you want the highest quality of

detailed images and graphics.

Example:

Conference 1 Presentation RelayQuality: Sharpness

Conference [1..1] Presentation OnPlacedOnHold

Define whether or not to continue sharing a presentation after the remote site has put you on

hold.

Requires user role: ADMIN
Value space: <Stop/NoAction>

Stop: The video system stops the presentation sharing when the remote site puts you on

hold. The presentation will not continue when the call is resumed.
NoAction: The video system will not stop the presentation sharing when put on hold. The

presentation will not be shared while you are on hold, but it will continue automatically when

the call is resumed.

Example:

Conference 1 Presentation OnPlacedOnHold: NoAction

Contents

Introduction

System settings

Setting passwords

Appendices

Web interface

System settings