Руководство По Обслуживанию для Cisco Cisco TelePresence MX700

D14850.05 MX Series Administrator Guide TC6.1, APRIL 2013.

Cisco TelePresence MX Series

Administrator Guide

Network settings

Network [1..1] IPStack

Select which internet protocols the system will support.
NOTE: Restart the system after changing this setting.

Requires user role: ADMIN
Value space: <IPv4/IPv6>

IPv4: IP version 4 is used for the SIP and H323 calls.
IPv6: IP version 6 is used for the SIP and H323 calls.

Example:

Network 1 IPStack: IPv4

Network [1..1] Assignment

Define how the system will obtain its IPv4 address, subnet mask and gateway address. This

setting only applies to systems on IPv4 networks.

Requires user role: ADMIN
Value space: <Static/DHCP>

Static: The addresses must be configured manually using the Network IPv4 Address,

Network IPv4 Gateway and Network IPv4 SubnetMask settings (static addresses).
DHCP: The system addresses are automatically assigned by the DHCP server.

Example:

Network 1 Assignment: DHCP

Network [1..1] IPv4 Address

Enter the static IPv4 network address for the system. This setting is only applicable when

Network Assignment is set to Static.

Requires user role: ADMIN
Value space: <S: 0, 64>

Format: A valid IPv4 address.

Example:

Network 1 IPv4 Address: "192.0.2.0"

Network [1..1] IPv4 Gateway

Define the IPv4 network gateway. This setting is only applicable when the Network Assignment

is set to Static.

Requires user role: ADMIN
Value space: <S: 0, 64>

Format: A valid IPv4 address.

Example:

Network 1 IPv4 Gateway: "192.0.2.0"

Network [1..1] IPv4 SubnetMask

Define the IPv4 network subnet mask. This setting is only applicable when the Network

Assignment is set to Static.

Requires user role: ADMIN
Value space: <S: 0, 64>

Format: The valid IPv4 address format.

Example:

Network 1 IPv4 SubnetMask: "255.255.255.0"

Network [1..1] IPv6 Assignment

Define how the system will obtain its IPv6 address and the default gateway address. This

setting only applies to systems on IPv6 networks.

Requires user role: ADMIN
Value space: <Static/DHCPv6/Autoconf>

Static: The codec and gateway IP addresses must be configured manually using the Network

IPv6 Address and Network IPv6 Gateway settings. The options, for example NTP and DNS

server addresses, must either be set manually or obtained from a DHCPv6 server. The

Network IPv6 DHCPOptions setting determines which method to use.
DHCPv6: All IPv6 addresses, including options, will be obtained from a DHCPv6 server. See

RFC 3315 for a detailed description. The Network IPv6 DHCPOptions setting will be ignored.
Autoconf: Enable IPv6 stateless autoconfiguration of the IPv6 network interface. See RFC

4862 for a detailed description. The options, for example NTP and DNS server addresses,

must either be set manually or obtained from a DHCPv6 server. The Network IPv6

DHCPOptions setting determines which method to use.

Example:

Network 1 IPv6 Assignment: Autoconf

Contents

Introduction

System settings

Setting passwords

Appendices

Web interface

System settings