Руководство По Обслуживанию для Cisco Cisco TelePresence MX700

D14850.05 MX Series Administrator Guide TC6.1, APRIL 2013.

Cisco TelePresence MX Series

Administrator Guide

SIP settings

SIP Profile [1..1] URI

The SIP URI or number is used to address the system. This is the URI that is registered and

used by the SIP services to route inbound calls to the system. A Uniform Resource Identifier

(URI) is a compact string of characters used to identify or name a resource.

Requires user role: ADMIN
Value space: <S: 0, 255>

Format: Compact string with a maximum of 255 characters.

Example:

SIP Profile 1 URI: "sip:firstname.lastname@company.com"

SIP Profile [1..1] DisplayName

When configured the incoming call will report the DisplayName instead of the SIP URI.

Requires user role: ADMIN
Value space: <S: 0, 255>

Format: String with a maximum of 255 characters.

Example:

SIP Profile 1 DisplayName: ""

SIP Profile [1..1] Authentication [1..1] LoginName

This is the user name part of the credentials used to authenticate towards the SIP proxy.

Requires user role: ADMIN
Value space: <S: 0, 128>

Format: String with a maximum of 128 characters.

Example:

SIP Profile 1 Authentication 1 LoginName: ""

SIP Profile [1..1] Authentication [1..1] Password

This is the password part of the credentials used to authenticate towards the SIP proxy.

Requires user role: ADMIN
Value space: <S: 0, 128>

Format: String with a maximum of 128 characters.

Example:

SIP Profile 1 Authentication 1 Password: ""

SIP Profile [1..1] DefaultTransport

Select the transport protocol to be used over the LAN.

Requires user role: ADMIN
Value space: <TCP/UDP/Tls/Auto>

TCP: The system will always use TCP as the default transport method.
UDP: The system will always use UDP as the default transport method.
Tls: The system will always use TLS as the default transport method. For TLS connections

a SIP CA-list can be uploaded to the video system. If no such CA-list is available on the

system then anonymous Diffie Hellman will be used.
Auto: The system will try to connect using transport protocols in the following order: TLS,

TCP, UDP.

Example:

SIP Profile 1 DefaultTransport: Auto

SIP Profile [1..1] TlsVerify

For TLS connections a SIP CA-list can be uploaded to the video system.

Requires user role: ADMIN
Value space: <Off/On>

Off: Set to Off to allow TLS connections without verifying them. The TLS connections are

allowed to be set up without verifying the x.509 certificate received from the server against

the local CA-list. This should typically be selected if no SIP CA-list has been uploaded.
On: Set to On to verify TLS connections. Only TLS connections to servers, whose x.509

certificate is validated against the CA-list, will be allowed.

Example:

SIP Profile 1 TlsVerify: Off

Contents

Introduction

System settings

Setting passwords

Appendices

Web interface

System settings