Руководство По Обслуживанию для Cisco Cisco TelePresence MX700
D14850.05 MX Series Administrator Guide TC6.1, APRIL 2013.
www.cisco.com — Copyright © 2011–2013 Cisco Systems, Inc. All rights reserved.
94
Cisco TelePresence MX Series
Administrator Guide
Video OSD MenuStartupMode
Not applicable in this version.
Video OSD VirtualKeyboard
Not applicable in this version.
Video OSD EncryptionIndicator
Define for how long the encryption indicator (a padlock) will be shown on screen. The setting
applies to both encrypted and non-encrypted calls, i.e. both to secure and non-secure
conferences. The icon for encrypted calls is a locked padlock, and the icon for non-encrypted
calls is a crossed out locked padlock.
Requires user role: ADMIN
Value space: <Auto/AlwaysOn/AlwaysOff>
Value space: <Auto/AlwaysOn/AlwaysOff>
Auto: If the Conference Encryption Mode setting is set to BestEffort and the call is
encrypted, the encryption indicator is shown during the first seconds of a call. If the
Conference Encryption Mode setting is set to BestEffort and the call is non-encrypted, the
crossed out encryption indicator is shown during the entire call. If the Conference Encryption
Mode setting is NOT set to BestEffort, the encryption indicator is not shown at all.
AlwaysOn: The encryption indicator is displayed on screen during the entire call. This applies
AlwaysOn: The encryption indicator is displayed on screen during the entire call. This applies
to both encrypted and non-encrypted calls for all Conference Encryption Mode settings.
AlwaysOff: The encryption indicator is never displayed on screen. This applies to both
AlwaysOff: The encryption indicator is never displayed on screen. This applies to both
encrypted and non-encrypted calls for all Conference Encryption Mode settings.
Example:
Video OSD EncryptionIndicator: Auto
Video OSD MissedCallsNotification
Not applicable in this version.
Video OSD AutoSelectPresentationSource
Not applicable in this version.
Video OSD TodaysBookings
Not applicable in this version.
Video OSD MyContactsExpanded
Not applicable in this version.
Video OSD Output
Not applicable in this version.
Video OSD InputMethod InputLanguage
Not applicable in this version.
Video OSD InputMethod Cyrillic
Not applicable in this version.
Video OSD LoginRequired
Not applicable in this version.
Video AllowWebSnapshots
Allow or disallow snapshots being taken of the local input sources, remote sites and
presentation channel. If allowed, the web interface Call Control page will show snapshots both
when idle and in a call.
NOTE: This feature is disabled by default, and must be enabled from the Touch controller.
NOTE: This feature is disabled by default, and must be enabled from the Touch controller.
Requires user role: ADMIN
Value space: <Off/On>
Value space: <Off/On>
Off: Capturing web snapshots is not allowed.
On: Web snapshots can be captured and displayed on the web interface.
On: Web snapshots can be captured and displayed on the web interface.
Example:
Video AllowWebSnapshots: Off
Contents
Introduction
System settings
Setting passwords
Appendices
Web interface
System settings