Руководство По Обслуживанию для Cisco Cisco TelePresence MX700

D14850.04 MX Series Administrator Guide TC6.0, JANUARY 2013.

Cisco TelePresence MX Series

Administrator Guide

Managing the video system’s

certificates

Certificate validation may be required when using TLS

(Transport Layer Security).

A server or client may require that your video system

presents a valid certificate to them before communication can

be set up.

The video system’s certificates are text files that verify the

authenticity of the system. These certificates may be issued

by a certificate authority (CA).

The certificate are listed as shown in the illustration to the

right

. They can be used for the following services: HTTPS,

SIP and IEEE 802.1X.

You can store several certificates on the system, but only one

certificate can be used for each service at a time.

If authentication fails, the connection will not be established.

Enabling and disabling certificates
Use the buttons to switch a

certificate on or off for the different

services.

You can also view a certificate,

and delete a certificate using the

corresponding buttons.

Contact your system administrator to obtain the

following file(s):

• Certificate (file format: .PEM)
• Private key, may be included in the same file as

the certificate (file format: .PEM format)

• Password (required only if the private key is

encrypted)

The certificate and the private key will be stored in

the same file on the video system.

Adding a certificate

1. Click

Add certificate...

to open the certificate dialog.

2. Click

Browse...

and find the Certificate and

Private key file(s) on your computer.

3. Fill in the

Password

if required.

4. Click

Add certificate...

to store the certificate

on your system.

Navigate to: Configuration > Security

The certificates and certificate issuers shown in the illustration

serve as examples. Your system may have other certificate(s).

Contents

Introduction

System settings

Setting passwords

Appendices

Web interface