Листовка для Cisco Cisco TelePresence MX700
Cisco TelePresence Endpoints running TC6 and Cisco Unified Communications Manager 9.0
Quick Reference Guide
D14996.01 Administering TC6 Endpoints on CUCM 9.0, January 2013.
www.cisco.com — Copyright © 2013 Cisco Systems, Inc. All rights reserved.
27
Setting the menu password
1. Connect to the system through the network or its serial
data port (if available) and open a command line interface
(SSH or Telnet).
See below how
See below how
to find the system’s IP address.
2. Sign in to the system with username and password. The
user needs ADMIN rights.
3. Type the following command:
xCommand SystemUnit MenuPassword Set
Password: <password>
The password format is a string with 0–255 characters.
The password format is a string with 0–255 characters.
To find the system’s IP address tap
Settings ( ) >
System Information
on the Touch controller.
Setting the menu password on the
endpoint
The menu password will restrict access to some menus.
When starting up the video conference system for the first
time anyone can access the Administrator menu on the Touch
controller because the menu password is not set.
We strongly recommend that you define a menu
password, because the administrator settings may
severely affect the behavior of the system.
You have to issue a command from the command line
interface to set the menu password on the Touch; neither the
Touch controller nor the web interface can be used.
Contents
Introduction
Endpoint configuration
CUCM configuration
Setting passwords
Appendices
Setting passwords