Руководство По Проектированию для Cisco Cisco Cius Wi-Fi

Cisco Cius Wireless Deployment Guide

• In the advanced menu of Wi-Fi settings, Dynamic Host Configuration Protocol (DHCP) or static IP settings can be

configured. To access the advanced menu, select the menu hard button (far left) to display the Advanced menu option.

• If DHCP option 150 or 66 is not configured to provide the TFTP server IP address via the network’s DHCP scope, then

enable Use alternate TFTP server in TFTP server settings and enter the IP address of the TFTP servers.

• Network profiles can be removed by tapping on the wireless LAN selection then selecting Forget or by selecting and

holding the wireless LAN selection, where Forget network will be displayed.

• Wireless LAN profile parameters can be modified after selecting and holding the wireless LAN selection, then

selecting Modify network.

Note: CCKM will be negotiated if enabled on the access point when using EAP-FAST, EAP-TLS or PEAP.
WEP128 is listed as WEP104 on the Cisco Unified Wireless LAN Controllers.
When Airplane mode is enabled, the Wi-Fi interface is disabled, but can be re-enabled optionally while still in Airplane mode.
Shared Key authentication and 802.1x + Dynamic WEP are not supported.