Руководство По Проектированию для Cisco Cisco Cius 4G
Cisco Cius Wireless Deployment Guide
27
• Select the Platinum QoS profile for the voice wireless LAN when using Cisco Unified Wireless LAN Controller
technology and set the 802.1p tag to 6.
• Enable Differentiated Services Code Point (DSCP) preservation on the Cisco IOS switch.
Note: Voice and interactive video frames will be marked with DSCP AF41 and WMM UP 5 for video calls.
The WMM UP marking could be downgraded if CAC (TSPEC) is enabled for voice or video.
For more information about TCP and UDP ports used by Cisco Cius and the Cisco Unified Communications Manager, refer to
the Cisco Unified Communications Manager TCP and UDP Port Usage document at this URL:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/port/8_6_1/portlist861.html
Configuring QoS in Cisco Unified Communications Manager
The SIP DSCP values are configured in the Cisco Unified Communications Manager enterprise parameters. Cisco Unified
Communications Manager uses the default value of CS3 to have devices set the DSCP marking for SIP packets as shown in the
Enterprise Parameters Configuration page.
Communications Manager uses the default value of CS3 to have devices set the DSCP marking for SIP packets as shown in the
Enterprise Parameters Configuration page.
Configuring QoS Policies for the Network
Configure QoS policies and settings for the following network devices.
Configuring Cisco Switch Ports
Configure the Cisco Unified Wireless LAN Controller and Cisco Access Point switch ports as well as any uplink switch ports.
Configure the Cisco Unified Wireless LAN Controller for trust COS.
Configure the Cisco Unified Wireless LAN Controller for trust COS.
Below is a sample switch configuration for the Cisco Unified Wireless LAN controller:
mls qos
!
!