Руководство По Установке для Cisco Cisco Content Security Management Appliance M160
9
•
IP Address: 192.168.42.43
•
Subnet Mask: 255.255.255.0
•
Router: 192.168.42.1
Step 6
Click OK.
8
Connect to the Appliance
The Cisco M170 appliance has two gigabit network ports:
P1 and P2.
For the purposes of setup, connect to P1 as your management
interface and configure incoming web traffic or email on the P2
interface. These settings can be changed after the initial
installation.
interface and configure incoming web traffic or email on the P2
interface. These settings can be changed after the initial
installation.
7JZ78-004E
P1
P2
CONSOLE
P1
P2
P1:
Management: 192.168.42.42
Management: 192.168.42.42
Connect the P1 port
to your computer using
an Ethernet cable.
to your computer using
an Ethernet cable.
P2:
Incoming web traffic or email
Incoming web traffic or email
Connect the P2 port
to your network using
an Ethernet cable.
to your network using
an Ethernet cable.
303494
M170_QSG.fm Page 9 Wednesday, March 13, 2013 10:01 PM