Примечания к выпуску для Cisco Cisco Content Security Management Appliance M160
1
Release Notes for AsyncOS 9.6.x for Cisco Content Security Management
Known and Fixed Issues
Information about other resources, including Tech Notes and the Cisco support community, is in the Additional Resources
chapter in the online help and User Guide PDF.
chapter in the online help and User Guide PDF.
Alert: Battery Relearn Timed Out (RAID Event) on 380 or 680 Hardware
Problem
You receive an alert with subject “Battery Relearn Timed Out” for 380 or 680 hardware.
Solution
This alert may or may not indicate a problem. The battery relearn timeout, in itself, does not mean there is any problem
with the RAID controller. The controller can recover in the subsequent relearn. Please monitor your email for any other RAID
alerts for the next 48 hours, to ensure that this is not the side-effect of any other problem. If you do not see any other
RAID-related alerts from the system, then you can safely ignore this alert.
alerts for the next 48 hours, to ensure that this is not the side-effect of any other problem. If you do not see any other
RAID-related alerts from the system, then you can safely ignore this alert.
SNMP
AsyncOS supports system status monitoring via Simple Network Management Protocol (SNMP) versions v1, v2, and v3.
MIBs are available from
When setting up SNMP to monitor connectivity:
When entering the url-attribute while configuring a connectivityFailure SNMP trap, determine whether the URL is pointing at
a directory or a file.
a directory or a file.
•
If it is a directory, add a trailing slash (/)
•
If it is a file, do not add a trailing slash
The following information applies beginning in AsyncOS 8.4:
The use of SNMPv3 with password authentication and DES Encryption is mandatory to enable this service. (For more
information on SNMPv3, see RFCs 2571-2575.) You are required to set a SNMPv3 passphrase of at least 8 characters to enable
SNMP system status monitoring. The first time you enter a SNMPv3 passphrase, you must re-enter it to confirm. The
snmpconfig command “remembers” this phrase the next time you run the command.
information on SNMPv3, see RFCs 2571-2575.) You are required to set a SNMPv3 passphrase of at least 8 characters to enable
SNMP system status monitoring. The first time you enter a SNMPv3 passphrase, you must re-enter it to confirm. The
snmpconfig command “remembers” this phrase the next time you run the command.
Known and Fixed Issues
Use the Cisco Bug Search Tool to find information about known and fixed defects in shipping releases.
Note
Known issues on Cisco Email Security Appliances and Cisco Web Security Appliances may appear in or impact
functionality of Cisco Content Security Management Appliances.
functionality of Cisco Content Security Management Appliances.
Known issues in previous content security management releases may also affect this release.
•
•
•