Руководство Пользователя для Cisco Cisco Content Security Management Appliance M160

When gathering data for reports, the Security Management appliance applies a time stamp on the data. 
The time stamp is applied using the configuration settings that you implemented from the steps in the 



For more information on how the Security Management appliance gathers data, see the 

You must change the password for the AsyncOS admin account. The new password must be six 
characters or longer. Keep the password in a secure location. Changes to the password take effect 
immediately. 

If you cancel the system setup after resetting the password, your password changes are not undone.

The Cisco IronPort AutoSupport feature (enabled by default) notifies Customer Support about issues 
with the Security Management appliance so that they can provide optimal support. For more information, 
see the 

Define the hostname of the machine and then configure the gateway and DNS settings. 

Verify that you have connected the Security Management appliance to your network through the 
Management port.

Enter the fully qualified hostname for the Security Management appliance. This name should be 
assigned by the network administrator.

Enter the IP address of the Security Management appliance.

Enter the network mask and IP address of the default router (gateway) on your network.

Next, configure the Domain Name Service (DNS) settings. AsyncOS contains a high-performance 
internal DNS resolver/cache that can query the Internet’s root servers directly, or the system can use 
DNS servers that you specify. If you use your own servers, you need to supply the IP address of each 
DNS server. You can enter up to four DNS servers when you are using the System Setup Wizard.

The DNS servers you specify have an initial priority of 0. For more information, see the 

.