Руководство Пользователя для Cisco Cisco Content Security Management Appliance M160

Chapter 11 Common Administrative Tasks

11-6

Cisco IronPort AsyncOS 7.2.0 for Security Management User Guide

OL-21768-01

The r

esume

command returns AsyncOS to normal operating state after using the

suspenddel or suspend command.

The resume Command

Resetting to Factory Defaults

When physically transferring the appliance, you may want to start with factory
defaults. The Reset Configuration section of the Management Appliance >
System Administration > Configuration File page, or the resetconfig
command, resets all AsyncOS configuration values to factory defaults. This
command is extremely destructive, and it should only be used when you are
transferring the unit or as a last resort to solving configuration issues. It is
recommended that you run the System Setup Wizard after resetting the
configuration.

Note

The

resetconfig

command works only when the appliance is in the offline state.

When the resetconfig command completes, the appliance is automatically
returned to the online state. If mail delivery was suspended before you issued the
resetconfig command, the mail will attempt to be delivered again when the
resetconfig command completes.

Warning

The

resetconfig

command will return all network settings to factory defaults,

potentially disconnecting you from the CLI, disabling services that you used to
connect to the appliance (FTP, Telnet, SSH, HTTP, HTTPS), and even removing
additional user accounts you created with the

userconfig

command. Do not

mail3.example.com> resume

Receiving resumed.

Mail delivery resumed.

mail3.example.com>