Руководство Пользователя для Cisco Cisco Content Security Management Appliance M160

Chapter 1 Setup and Installation

1-6

Cisco IronPort AsyncOS 7.2.0 for Security Management User Guide

OL-21768-01

Understanding the System Setup Steps

To set up the Security Management appliance:

Step 1

Determine network and IP address assignments.

Step 2

Gather information about your system setup.

Step 3

Launch a web browser and enter the IP address of the appliance.

Step 4

Run the System Setup Wizard to configure the system.

Determining Network and IP Address Assignments

You need the following network information about each Ethernet port that you
choose to use:

•

IP address

•

Netmask

In addition, you need the following information about your overall network:

•

IP address of the default router (gateway) on your network

•

IP address and hostname of your DNS servers (not required if you want to use
Internet root servers)

•

Hostname or IP address of your NTP servers (not required if you want to
manually set system time)

For more information, see

Appendix B, “Assigning Network and IP Addresses.”

Note

If you are running a firewall on your network between the Internet and the Cisco
IronPort appliance, it may be necessary to open specific ports for the Cisco
IronPort appliance to work properly. For more information on firewalls, see

Appendix C, “Firewall Information.”