Руководство Пользователя для Cisco Cisco Content Security Management Appliance M160

additional NTP server. For more information, see the 

You must change the password for the AsyncOS admin account. Keep the password in a secure location. 
Changes to the password take effect immediately. 

If you cancel the system setup after resetting the password, your password changes are not undone.

The AutoSupport feature (enabled by default) notifies Customer Support about issues with the Security 
Management appliance so that they can provide optimal support. For more information, see the 

.

Define the hostname of the machine and then configure the gateway and DNS settings. 

Verify that you have connected the Security Management appliance to your network through the 
Management port.

Enter the fully qualified hostname for the Security Management appliance. This name should be 
assigned by the network administrator.

Enter the IP address of the Security Management appliance.

Enter the network mask and IP address of the default router (gateway) on your network.

Next, configure the Domain Name Service (DNS) settings. AsyncOS contains a high-performance 
internal DNS resolver/cache that can query the Internet’s root servers directly, or the system can use 
DNS servers that you specify. If you use your own servers, you need to supply the IP address of each 
DNS server. You can enter up to four DNS servers when you are using the System Setup Wizard.

The DNS servers you specify have an initial priority of 0. For more information, see the 

.

The appliance requires access to a working DNS server to perform DNS lookups for incoming 
connections. If you cannot specify a working DNS server that is reachable by the appliance while you 
are setting up the appliance, you can select Use Internet Root DNS Servers, or else temporarily specify 
the IP address of the Management interface so that you can complete the System Setup Wizard.