Примечания к выпуску для Cisco Cisco IOS Software Releases 12.2 MC
14
Release Notes for the Catalyst 2960 Switches, Cisco IOS Release 12.2(25)FX
OL-7076-01
Resolved Caveats
Beginning in privileged EXEC mode, follow these steps to configure the HTTP server interface:
•
If you use Internet Explorer Version 5.5 and select a URL with a nonstandard port at the end of the
address (for example, www.cisco.com:84), you must enter http:// as the URL prefix. Otherwise, you
cannot launch the device manager.
address (for example, www.cisco.com:84), you must enter http:// as the URL prefix. Otherwise, you
cannot launch the device manager.
Resolved Caveats
These are the resolved caveats in this software release:
•
CSCei61732
Cisco IOS may permit arbitrary code execution after exploitation of a heap-based buffer overflow
vulnerability. Cisco has included additional integrity checks in its software, as further described
below, that are intended to reduce the likelihood of arbitrary code execution.
vulnerability. Cisco has included additional integrity checks in its software, as further described
below, that are intended to reduce the likelihood of arbitrary code execution.
Cisco has made free software available that includes the additional integrity checks for affected
customers.
customers.
This advisory is posted at
Related Documentation
These documents provide complete information about the Catalyst 2960 switches and are available at
Cisco.com:
Cisco.com:
You can order printed copies of documents with a DOC-xxxxxx= number from the Cisco.com sites and
from the telephone numbers listed in the
from the telephone numbers listed in the
.
Command Purpose
Step 1
configure terminal
Enter global configuration mode.
Step 2
ip http authentication {enable | local |
tacacs}
tacacs}
Configure the HTTP server interface for the type of authentication that
you want to use.
you want to use.
•
enable—Enable password, which is the default method of HTTP
server user authentication, is used.
server user authentication, is used.
•
local—Local user database, as defined on the Cisco router or access
server, is used.
server, is used.
•
tacacs—TACACS server is used.
Step 3
end
Return to privileged EXEC mode.
Step 4
show running-config
Verify your entries.