для Cisco Cisco IOS Software Release 12.2(8)T
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
ATM Software Segmentation and Reassembly (SAR)
Supported Platforms
5
Cisco IOS Release 12.2(8)T
http://www.atmforum.com/atmforum/specs/approved.html
•
ITU I-series documents located at
http://www.itu.int/home/index.html
–
I.363.2, B-ISDN ATM Adaptation Layer Specification: Type 2 AAL
–
I.366.1, Segmentation and Reassembly Service Specific Convergence Sublayer for the AAL
Type 2
Type 2
–
I.366.2, AAL Type 2 Service Specific Convergence Sublayer for Trunking
•
Cisco IOS Voice, Video, and Fax Configuration Guide, Release 12.2
•
Cisco IOS Voice, Video, and Fax Command Reference, Release 12.2
•
Cisco IOS Interface Command Reference, Release 12.2
•
Cisco IOS Interface Configuration Guide, Release 12.2
Supported Platforms
•
Cisco 2600 series
•
Cisco 3660
Supported Standards, MIBs, and RFCs
Standards
No new or modified standards are supported by this feature.
MIBs
No new or modified MIBs are supported by this feature.
To obtain lists of supported MIBs by platform and Cisco IOS release, and to download MIB modules,
go to the Cisco MIB website on Cisco.com at the following
go to the Cisco MIB website on Cisco.com at the following
URL:
http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml
.
RFCs
•
RFC 1577
•
RFC 1483
•
RFC 2221
•
RFC 3661
Prerequisites
T1/E1 multiflex VWICs on Cisco 2600 series routers must be plugged into slot zero. The Cisco 3660
must be configured with a T1/E1 IMA Network Module. PBX voice requires a Digital T1/E1 Packet
Voice Trunk Network Module Interface to be installed in the network module slot in the Cisco 2600
series or Cisco 3660.
must be configured with a T1/E1 IMA Network Module. PBX voice requires a Digital T1/E1 Packet
Voice Trunk Network Module Interface to be installed in the network module slot in the Cisco 2600
series or Cisco 3660.