Технические ссылки для Cisco Cisco IOS Software Release 12.4(2)XB6
19
Command Reference for Cisco PDSN Release 4.0 in IOS Release 12.4(15)XR
cdma pdsn a11 mandate presence airlink-setup
To mandate that the initial RRQ should have Airlink-Setup in Acct CVSE from PCF, use the cdma pdsn
all mandate presence airlink-setup command in global configuration mode. To disable this feature, use
the no form of this command.
all mandate presence airlink-setup command in global configuration mode. To disable this feature, use
the no form of this command.
cdma pdsn a11 mandate presence airlink-setup
no cdma pdsn a11 mandate presence airlink-setup
Syntax Description
This command has no keywords or variables.
Defaults
There are no default values.
Command Modes
Global configuration
Command History
Usage Guidelines
Issuing this command mandates that the initial RRQ should have Airlink-Setup in Acct CVSE from PCF.
As a result, if this Airlink setup is not present in the RRQ, the session is not created, and a RRP with
error code “86H - Poorly formed request” is returned.
As a result, if this Airlink setup is not present in the RRQ, the session is not created, and a RRP with
error code “86H - Poorly formed request” is returned.
If you do not configure this command, or disable it, then sessions can be opened even with no accounting
CVSE being present in the initial RRQ.
CVSE being present in the initial RRQ.
Examples
router# cdma pdsn a11 mandate presence airlink-setup
Release
Modification
12.2(8)ZB1
This command was introduced.