Технические ссылки для Cisco Cisco IOS Software Release 12.4(15)XM
debug ip mobile
30
Cisco Mobile Wireless Home Agent Feature for IOS Release 12.4(15)XM2
12.4(15)XM2
debug ip mobile
To display IP mobility activities, use the debug ip mobile command in privileged EXEC mode.
debug ip mobile [advertise | dfp | host [access-list-number] | local-area | redundancy | router |
upd-tunneling | vpdn-tunneling]
Syntax Description
Defaults
No default behavior or values.
Command Modes
Privileged EXEC
Command History
Usage Guidelines
Use the debug ip mobile redundancy command to troubleshoot redundancy problems.
No per-user debugging output is shown for mobile nodes using the network access identifier (NAI) for
the debug ip mobile host command. Debugging of specific mobile nodes using an IP address is possible
through the access list.
the debug ip mobile host command. Debugging of specific mobile nodes using an IP address is possible
through the access list.
Examples
The following is sample output from the debug ip mobile command when Foreign Agent reverse
tunneling is enabled:
tunneling is enabled:
MobileIP:MN 14.0.0.30 deleted from ReverseTunnelTable of Ethernet2/1(Entries 0)
advertise
(Optional) Mobility Agent advertisement information.
dfp
(Optional) DFP Agent.
host
(Optional) The mobile host activity.
access-list-number (Optional) The number of an IP access list.
local-area
(Optional) The local area.
redundancy
(Optional) Mobile redundancy activities.
router
(Optional) Mobile router activities.
upd-tunneling
(Optional) UDP tunneling.
vpdn-tunneling
(Optional) VPDN tunneling.
Release
Modification
12.0(1)T
This command was introduced.
12.0(2)T
The standby keyword was added.
12.2(13)T
This command was enhanced to display information about Foreign Agent
reverse tunnels and the mobile networks attached to the mobile router.
reverse tunnels and the mobile networks attached to the mobile router.
12.3(7)XJ
This command is enhanced to include the Resource Management capability.