Руководство По Устранению Ошибки для Cisco Cisco IOS Software Release 12.2(33)SRE
the problem is associated with the RP, the SP designation in the error is not present. For this reason, the
previous outputs must be taken from the SP. In order to accomplish this, precede the commands with:
previous outputs must be taken from the SP. In order to accomplish this, precede the commands with:
remote command switch
The error message might also refer to the standby SUP/RSP RP or SP as denoted by STDBY, and needs to be
collected accordingly.
collected accordingly.
Summary
You might speed up case resolution and bring stability to your device more quickly if you collect the outputs
listed in this document. If any questions arise or if there is uncertainty about memory performance on a
device, it is best to open a TAC case in order to have it investigated.
listed in this document. If any questions arise or if there is uncertainty about memory performance on a
device, it is best to open a TAC case in order to have it investigated.
Related Information
Troubleshooting Memory Problems
•
Understanding Buffer Misses and Failures − Buffer Pool
•
Technical Support & Documentation − Cisco Systems
•
Updated: Sep 30, 2013
Document ID: 116467