Руководство По Устранению Ошибки для Cisco Cisco IOS XE 3.5E

     Example 10: MLS QoS Enable with Queue−Limit Configuration
        3750
        3850
     Example 11: MLS QoS Enable with Queue−Buffer Configuration
        3750
        3850
     Example 12: MLS QoS Enable with Bandwidth Configuration
        3750
        3850
     Example 13: MLS QoS Enable with Priority
        3750
        3850
     Example 14: MLS QoS Enable with Shaper Configuration
        3750
        3850
     Example 15 : MLS QoS Enable with Bandwith
        3750
        3850
     Example 16: HQoS
        3750
        3850

The document describes the basic difference between 3750 Multilayer Switching (MLS) Quality of Service
(QoS) and Cisco Catalyst 3850 Switches Modular QoS CLI (MQC) QoS. It also provides detailed information
about conversion through sample configurations. This document only applies to the Wired QoS. This
document is for networking professionals who are responsible for the design, implemention, or administation
of a network that includes a standalone Cisco Catalyst 3850 Switch or a Cisco Catalyst 3850 Switch stack,
referred to as the switch.

Cisco recommends that you have knowledge of these topics:

Cisco IOS

®

 Software

• 

Concepts and terminology of MLS and MQC QoS

• 

This document is not restricted to specific software and hardware versions.

The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.