Примечания к выпуску для Cisco Cisco Fabric Manager Release 4.2

Click the Installing Fabric Manager link.

Select the drive for your CD-ROM.

Click the FM Installer link.

Follow the onscreen instructions provided in the Fabric Manager Installer 4.2(3a).

If you have any folders open or Windows Explorer task windows open during the installation, you might 
see the following error message:

C:\Program Files\Cisco Systems\dcm\fm\help\shared\images\Thumbs.db (Access is denied)

To resolve this issue, close all open folders and open Windows Explorer task windows and restart the 
FM Installer.

Windows 2000 is incompatible with Fabric Manager Release 4.2(3a). If you install Fabric Manager in a 
Windows 2000 environment, you are at risk of having an unstable Fabric Manager. We recommend that 
you exit the installation and update your environment. See 

 for the list of supported software that 

has been tested with Cisco Fabric Manager. See 

 for the supported upgrade paths for Fabric 

Manager.

To install Device Manager on your workstation, follow these steps:

Enter the IP address of the switch in the Address field of your browser.

Click the Cisco Device Manager link in the Device Manager installation window.

Click Next to begin the installation.

Follow the onscreen instructions to complete the installation of Device Manager.

If you use a Java JDK instead of a JRE on Solaris, you might encounter a problem trying to install the 
Device Manager from a web browser. This can happen because the installer heap limit of 256 MB is not 
sufficient. If you have this problem, save the jnlp link as file, increase the heap limit to 512 MB, and run 
javaws element-manager.jnlp at the shell prompt.

Cisco Fabric Manager cannot discover a Cisco UCS 6100 Series Fabric Interconnect until it has been 
properly configured. To configure a Cisco UCS 6100 Series before you use Cisco Fabric Manager to 
discover it, follow these steps:

Enable SNMP on the Cisco UCS 6100 Series. SNMP is disabled by default.