для Cisco Cisco IOS Software Release 15.0(1)S

Example:

Router#

show ip mds forwarding

IP multicast MDFS forwarding information and statistics:
Flags: N - Not MDFS switchable, F - Not all MDFS switchable, O - OIF Null

R - In-ratelimit, A - In-access, M - MTU mismatch, P - Register set

Interface state: Interface, Next-Hop, Mac header
(*, 224.2.170.73),

Incoming interface: Null

Pkts: 0, last used: never, Kbps: 0, fast-flags: N
Outgoing interface list: Null

(192.168.62.86, 224.2.170.73) [31]

Incoming interface: Fddi3/0/0
Pkts: 3034, last used: 00:00:00, Kbps: 0, fast-flags: M
Outgoing interface list:

Step 3

show ip mds summary
Use this command to display a summary of the MFIB. For example:

Example:

Router#

show ip mds summary

IP multicast MDFS forwarding information and statistics:
Flags: N - Not MDFS switchable, F - Not all MDFS switchable, O - OIF Null

R - In-ratelimit, A - In-access, M - MTU mismatch, P - Register set

Interface state: Interface, Next-Hop, Mac header
(*, 224.2.170.73),

Incoming interface: Null
Pkts: 0, last used: never, Kbps: 0, fast-flags: N

(192.168.62.86, 224.2.170.73) [31]

Incoming interface: Fddi3/0/0
Pkts: 3045, last used: 00:00:03, Kbps: 0, fast-flags: M

(192.168.3.7, 224.2.170.73) [334]

Incoming interface: Fddi3/0/0
Pkts: 0, last used: never, Kbps: 0, fast-flags: M

Step 4

exit
Use this command to exit to user EXEC mode. For example:

Example:

Router# exit
Router>

Monitoring Multicast Distributed Switching on the Route Processor

Perform the following task to monitor MDS on the RP.

IP Switching: Configuring Multicast Distributed Switching Configuration Guide, Cisco IOS Release 15S

Configuring Multicast Distributed Switching

Monitoring Multicast Distributed Switching