Техническая Инструкция для Cisco Cisco ASA 5506W-X with FirePOWER Services
Contents
Introduction
Prerequisites
Requirements
Components Used
Background Information
Outbound SSL Decryption
Inbound SSL Decryption
Configuration for SSL Decryption
Outbound SSL decryption (Decrypt - Resign)
Step 1. Configure the CA certificate.
Step 2. Configure the SSL Policy.
Step 3. Configure the Access Control Policy
Inbound SSL Decryption (Decrypt - Known)
Step 1. Import the Server Certificate and Key.
Step 2. Import the CA certificate (optional).
Step 3. Configure the SSL Policy.
Step 4. Configure the Access Control Policy.
Verify
Troubleshoot
Related Information
Introduction
This document describes the configuration of Secure Sockets Layer (SSL) decryption on the
FirePOWER Module using ASDM (On-Box Management).
FirePOWER Module using ASDM (On-Box Management).
Prerequisites
Requirements
Cisco recommends that you have knowledge of these topics:
Knowledge of ASA (Adaptive Security Appliance) firewall, ASDM (Adaptive Security Device
Manager)
Manager)
●
Knowledge of FirePOWER appliance
●
Knowledge of HTTPS/SSL protocol
●
Components Used
The information in this document is based on these software and hardware versions:
ASA FirePOWER modules (ASA 5506X/5506H-X/5506W-X, ASA 5508-X, ASA 5516-X )
●