Техническая Инструкция для Cisco Cisco ASA 5506W-X with FirePOWER Services
Contents
Introduction
Prerequisites
Requirements
Components Used
Background Information
Understanding Rule Expansion
Expansion of an IP Based Rule
Expansion of an IP Based Rule using Custom URL
Expansion of an IP Based Rule using Ports
Expansion of an IP Based Rule Using VLANs
Expansion of an IP Based Rule with URL Categories
Expansion of an IP based Rule with Zones
General Formula for Rule Expansion
Troubleshooting Deployment Failure due to Rule Expansion
Related Information
Introduction
This document describes the translation of Access Control rules to the sensor when deployed from
the Firepower Management Center (FMC).
the Firepower Management Center (FMC).
Prerequisites
Requirements
Cisco recommends that you have knowledge of these topics:
Knowledge of Firepower technology
●
Knowledge on configuring Access control policies on FMC
●
Components Used
The information in this document is based on these software and hardware versions:
Firepower Management Center version 6.0.0 and above
●
ASA Firepower Defense Image (ASA 5515-X, ASA 5525-X, ASA 5545-X, ASA 5555-X, ASA
5585-X) running software version 6.0.1 and above
5585-X) running software version 6.0.1 and above
●
ASA Firepower SFR Image (ASA 5515-X, ASA 5525-X, ASA 5545-X, ASA 5555-X, ASA
5585-X) running software version 6.0.0 and above
5585-X) running software version 6.0.0 and above
●
Firepower 7000/8000 series sensor version 6.0.0 and above
●