Примечания к выпуску для Cisco Cisco IPS 4345 Sensor

The following FTP servers are supported for IPS software updates:

WU-FTPD 2.6.2 (Linux) 

Solaris 2.8

Sambar 6.0 (Windows 2000)

Serv-U 5.0 (Windows 2000)

MS IIS 5.0 (Windows 2000)

The following HTTP/HTTPS servers are supported for IPS software updates:

CSM - Apache Server (Tomcat)

CSM - Apache Server (JRun) 

ROMMON uses TFTP to download an image and launch it. TFTP does not address network issues such 
as latency or error recovery. It does implement a limited packet integrity check so that packets arriving 
in sequence with the correct integrity value have an extremely low probability of error. But TFTP does 
not offer pipelining so the total transfer time is equal to the number of packets to be transferred times 
the network average RTT. Because of this limitation, we recommend that the TFTP server be located on 
the same LAN segment as the sensor. Any network with an RTT less than a 100 milliseconds should 
provide reliable delivery of the image. Be aware that some TFTP servers limit the maximum file size that 
can be transferred to ~32 MB.

Use the following tools for configuring Cisco IPS 7.1(4)E4 sensors:

Cisco IDM 7.1.4

IDM 7.1.4 is included within the IPS 7.1(4)E4 files.

IDM 7.1.4 is included within IME 7.2.1.

IDM 7.1.4 requires JRE 1.6 or later.

You can use IDM 7.1.4 to configure IPS 6.2, 7.0, and 7.1 sensors. 

Cisco IME 7.2.1

You can use IME 7.2.1 to configure IPS 6.1, 6.2, 7.0, and 7.1 sensors. 

IPS CLI included in IPS 7.1(4)E4.

Cisco ASDM 6.3.4 and later.

Use the following tools for monitoring Cisco IPS 7.1(4)E4 sensors:

IDM 7.1.4

IME 7.2.1

MARS minimum version 5.2 and latest version 6.0.5

MARS does not support the IPS 4500 series sensors.