Руководство По Устранению Ошибки для Cisco Cisco 2000 Series Wireless LAN Controller

AUTO−INSTALL: interface 'service−port' − setting DHCP Host Name ==> ' '

AUTO−INSTALL: interface 'service−port' − setting DHCP yiaddr ==> 10.77.244.197

AUTO−INSTALL: interface 'service−port' − setting DHCP Netmask ==> 255.255.255.224

AUTO−INSTALL: interface 'service−port' − setting DHCP Gateway ==> 10.77.244.193

AUTO−INSTALL: interface 'service−port' registered

AUTO−INSTALL: iteration 1 −− interface 'service−port'

AUTO−INSTALL: hostname ' '

AUTO−INSTALL: TFTP server 10.77.244.196 (from DHCP Option 150)

AUTO−INSTALL: attempting download of 'WLC−4400.cfg'

AUTO−INSTALL: TFTP status − 'TFTP Config transfer starting.'

AUTO−INSTALL: TFTP status − 'TFTP receive complete... updating configuration.'

AUTO−INSTALL: TFTP status − 'Warning! No AP will come up unless the time is set.

'

AUTO−INSTALL: TFTP status − 'TFTP receive complete... storing in flash.'

AUTO−INSTALL: TFTP status − 'System being reset.'

Resetting system ...

In this example you can see that the WLC is assigned an IP address (10.77.244.196) on it's service port, TFTP
Server information and the boot file name − WLC−4400.cfg necessary to be downloaded from the TFTP
server. Once the configuration file is obtained from the TFTP server, the WLC automatically restarts with the
configuration file obtained.

• 

• 

• 

Contacts & Feedback | Help | Site Map
© 2013 − 2014 Cisco Systems, Inc. All rights reserved. Terms & Conditions | Privacy Statement | Cookie Policy | Trademarks of
Cisco Systems, Inc.

Updated: Dec 15, 2009

Document ID: 111452