Руководство По Устранению Ошибки для Cisco Cisco Flex 7510 Wireless Controller

Introduction
 Prerequisites
      Requirements
      Components Used
      Conventions
 Feature Overview
 Related Information

This document explains how to use an External Web Server with FlexConnect Local Switching for different
Web Policies.

Ensure that you meet these requirements before you attempt this configuration:

Basic knowledge about FlexConnect Architecture and Access Points (APs)

• 

Knowledge on how to set up and configure an external web server

• 

Knowledge on how to set up and configure DHCP and DNS servers

• 

The information in this document is based on these software and hardware versions:

Cisco 7500 Wireless LAN Controller (WLC) that runs firmware release 7.2.110.0

• 

Cisco 3500 Series Lightweight Access Point (LAP)

• 

External web server that hosts the web authentication login page

• 

DNS and DHCP Servers on local site for address resolution and IP address allocation to wireless
clients

• 

The information in this document was created from the devices in a specific lab environment. Although a
7500 Series WLC is used for this deployment guide, this feature is supported on 2500, 5500, and WiSM−2
WLCs. All of the devices used in this document started with a cleared (default) configuration. If your network
is live, make sure that you understand the potential impact of any command.

Refer to Cisco Technical Tips Conventions for more information on document conventions.