Примечания к выпуску для Cisco Cisco Flex 7510 Wireless Controller
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Release Notes for Cisco Wireless Controller
Field Upgrade Software, Release 1.10.0.0
Field Upgrade Software, Release 1.10.0.0
First Published: May 12, 2015
Contents
These release notes contain the following topics:
•
•
•
•
•
Introduction
Cisco Wireless Controller (WLC) Field Upgrade Software (FUS) is a special AES package that performs
various system-related component upgrades. We recommend that you install the FUS image to upgrade
components such as the bootloader, emergency image, FPGA/MCU, and other firmware to their latest
respective versions.
various system-related component upgrades. We recommend that you install the FUS image to upgrade
components such as the bootloader, emergency image, FPGA/MCU, and other firmware to their latest
respective versions.
If your Emergency Image Version is prior to 8.1, we recommend that you upgrade to Cisco Wireless
Controller Field Upgrade Software, Release 1.10.0.0, for the following platforms:
Controller Field Upgrade Software, Release 1.10.0.0, for the following platforms:
•
Cisco Flex 7500 Series Wireless Controllers
•
Cisco 8500 Series Wireless Controllers
•
Cisco Virtual Wireless Controller
Note
Cisco Wireless Controller Field Upgrade Software, Release 1.10.0.0, is not required for Cisco 2500
Series, 5500 Series Wireless Controllers, and Cisco WiSM2.
Series, 5500 Series Wireless Controllers, and Cisco WiSM2.