Примечания к выпуску для Cisco Cisco 2106 Wireless LAN Controller

The following components are part of the Cisco UWN Solution and are compatible in this release:

Software release 5.0.148.2 for all Cisco controllers and lightweight access points

Cisco autonomous to lightweight mode upgrade tool release 3.0

Cisco Wireless Control System (WCS) software release 5.0.55.0

Cisco WCS Navigator 1.2.55.0

Location appliance software release 4.0.32.0

Cisco 2700 Series Location Appliances

Cisco 2100 Series Wireless LAN Controllers

Cisco 4400 Series Wireless LAN Controllers

Cisco Wireless Services Module (WiSM) for Cisco Catalyst 6500 Series Switches

Cisco Wireless LAN Controller Network Module for Cisco Integrated Services Routers

The 5.0.148.2 release does not support the NM-AIR-WLC6 platform. 

Catalyst 3750G Wireless LAN Controller Switches

Cisco 3201 Wireless Mobile Interface Card (WMIC)

Cisco Aironet 1100, 1130, 1200, 1240, 1250, and 1300 Series Lightweight Access Points

Cisco Aironet 1000 series access points are not supported for use with controller software 
release 5.0.148.0 or later.

The 1250 series access points have a hardware limitation where beacons can only be output 
at intervals that are multiples of 17 milliseconds.  When these APs are configured for a 
100-millisecond beacon interval, they transmit beacons every 102 milliseconds. Similarly, 
when the beacon interval is configured for 20 milliseconds, these APs transmit beacons 
every 17 milliseconds.

Do not upgrade to controller software release 5.0.148.2 if you have mesh access points in your network. 
If your network uses mesh access points, use only mesh-specific releases such as 4.1.191.24M.