Примечания к выпуску для Cisco Cisco 2106 Wireless LAN Controller
3
Release Notes for Cisco Wireless LAN Controllers and Lightweight Access Points for Release 5.2.178.0
OL-31336-01
Controller Requirements
Note
Controller software release 5.0.148.0 or later is not compatible with Cisco Aironet 1000
series access points.
series access points.
Note
Only Cisco Aironet 1200 series access points that contain 802.11g (AIR-MP21G) or
second-generation 802.11a radios (AIR-RM21A or AIR-RM22A) are supported for use with
controller software releases. The AIR-RM20A radio, which was included in early 1200
series access point models, is not supported. To see the type of radio module installed in your
access point, enter this command on the access point: show controller dot11radio n, where
n is the number of the radio (0 or 1).
second-generation 802.11a radios (AIR-RM21A or AIR-RM22A) are supported for use with
controller software releases. The AIR-RM20A radio, which was included in early 1200
series access point models, is not supported. To see the type of radio module installed in your
access point, enter this command on the access point: show controller dot11radio n, where
n is the number of the radio (0 or 1).
Note
The 1250 and the 1140 series access points have a hardware limitation where beacons can
only be output at intervals that are multiples of 17 milliseconds. When these APs are
configured for a 100-millisecond beacon interval, they transmit beacons every 102
milliseconds. Similarly, when the beacon interval is configured for 20 milliseconds, these
APs transmit beacons every 17 milliseconds.
only be output at intervals that are multiples of 17 milliseconds. When these APs are
configured for a 100-millisecond beacon interval, they transmit beacons every 102
milliseconds. Similarly, when the beacon interval is configured for 20 milliseconds, these
APs transmit beacons every 17 milliseconds.
Controller Requirements
The controller GUI requires the following operating system and web browser:
•
Windows XP SP1 (or later) or Windows 2000 SP4 (or later)
•
Internet Explorer 6.0 SP1 (or later) or Mozilla Firefox 2.0.0.11 (or later)
Note
Internet Explorer 6.0 SP1 (or later) and Mozilla Firefox 2.0.0.11 (or later) are the only
browsers supported for using the controller GUI and web authentication.
browsers supported for using the controller GUI and web authentication.
MIB Files
Cisco controllers support standard SNMP Management Information Base (MIB) files. MIBs can be
downloaded from the Software Center on Cisco.com. Only one MIB is posted per major release (5.2, 5.1,
and so on). If an updated MIB becomes available, the previous version is removed from the Software
Center and replaced by the new version.
downloaded from the Software Center on Cisco.com. Only one MIB is posted per major release (5.2, 5.1,
and so on). If an updated MIB becomes available, the previous version is removed from the Software
Center and replaced by the new version.
Software Release Information
Software is factory installed on your controller and automatically downloaded to the access points after
a release upgrade and whenever an access point joins a controller. As new releases become available for
the controllers and their access points, consider upgrading.
a release upgrade and whenever an access point joins a controller. As new releases become available for
the controllers and their access points, consider upgrading.