Примечания к выпуску для Cisco Cisco 2106 Wireless LAN Controller
15
Release Notes for Cisco Wireless LAN Controllers and Lightweight Access Points for Release 5.1.151.0
OL-31336-01
Installation Notes
Other Changes
These additional changes are applicable to controller software release 5.1.151.0:
•
The controller now supports traffic classification (TCLAS) coming from 7921 phones using
firmware version 1.1.1. This feature ensures proper classification of voice streams to the 7921
phones.
firmware version 1.1.1. This feature ensures proper classification of voice streams to the 7921
phones.
•
The default value for the RRM transmit power threshold has been changed from –65 dBm to –70
dBm.
dBm.
•
The config network arpunicast {enable | disable} command has been removed from the controller
CLI, and the ARP Unicast Mode line has been removed from the output of the show network
summary command (CSCsl72127).
CLI, and the ARP Unicast Mode line has been removed from the output of the show network
summary command (CSCsl72127).
•
The show run-config command now includes access point group information (CSCsi22092).
•
You can use these CLI commands to save debug messages to the controller buffer, the controller
console, or an external syslog server (CSCsc33206):
console, or an external syslog server (CSCsc33206):
–
config logging debug buffered {enable | disable}
–
config logging debug console {enable | disable}
–
config logging debug syslog {enable | disable}
•
You can use these CLI commands to enable or disable timestamps in log messages and debug
messages (CSCsk66663):
messages (CSCsk66663):
–
config service timestamps log {datetime | disable}
–
config service timestamps debug {datetime | disable}
•
The LDAP SecureTLS mode feature, which is documented in previous releases, has been
intentionally removed in controller software release 5.1.151.0 because it does not work properly
(CSCso43490). On the controller GUI, the Server Mode field on the LDAP Servers pages has been
removed. In the controller CLI, the secure option has been removed from the config ldap add index
server_ip_address port# user_dn password base_dn {secure} command.
intentionally removed in controller software release 5.1.151.0 because it does not work properly
(CSCso43490). On the controller GUI, the Server Mode field on the LDAP Servers pages has been
removed. In the controller CLI, the secure option has been removed from the config ldap add index
server_ip_address port# user_dn password base_dn {secure} command.
Installation Notes
This section contains important information to keep in mind when installing controllers and access
points.
points.
Warnings
Warning
This warning means danger. You are in a situation that could cause bodily injury. Before you work on
any equipment, be aware of the hazards involved with electrical circuitry and be familiar with
standard practices for preventing accidents.
any equipment, be aware of the hazards involved with electrical circuitry and be familiar with
standard practices for preventing accidents.
Warning
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.