Примечания к выпуску для Cisco Cisco 2106 Wireless LAN Controller
24
Release Notes for Cisco Wireless LAN Controllers and Lightweight Access Points for Release 6.0.182.0
OL-31336-01
Using the Cisco 5500 Series Controller USB Console Port
5.
When installing an antenna, remember:
a.
Do not use a metal ladder.
b.
Do not work on a wet or windy day.
c.
Do dress properly—shoes with rubber soles and heels, rubber gloves, long-sleeved shirt or
jacket.
jacket.
6.
If the assembly starts to drop, get away from it and let it fall. Remember that the antenna, mast,
cable, and metal guy wires are all excellent conductors of electrical current. Even the slightest touch
of any of these parts to a power line completes an electrical path through the antenna and the
installer: you!
cable, and metal guy wires are all excellent conductors of electrical current. Even the slightest touch
of any of these parts to a power line completes an electrical path through the antenna and the
installer: you!
7.
If any part of an antenna system should come in contact with a power line, do not touch it or try
to remove it yourself. Call your local power company. They will remove it safely.
to remove it yourself. Call your local power company. They will remove it safely.
8.
If an accident should occur with the power lines, call for qualified emergency help immediately.
Installation Instructions
Refer to the appropriate quick start guide or hardware installation guide for instructions on installing
controllers and access points.
controllers and access points.
Note
To meet regulatory restrictions, all external antenna configurations must be professionally installed.
Personnel installing the controllers and access points must understand wireless techniques and
grounding methods. Access points with internal antennas can be installed by an experienced IT
professional.
grounding methods. Access points with internal antennas can be installed by an experienced IT
professional.
The controller must be installed by a network administrator or qualified IT professional, and the proper
country code must be selected. Following installation, access to the controller should be password
protected by the installer to maintain compliance with regulatory requirements and ensure proper unit
functionality.
country code must be selected. Following installation, access to the controller should be password
protected by the installer to maintain compliance with regulatory requirements and ensure proper unit
functionality.
Using the Cisco 5500 Series Controller USB Console Port
The USB console port on the 5500 series controllers connects directly to the USB connector of a PC
using a USB Type A-to-5-pin mini Type B cable.
using a USB Type A-to-5-pin mini Type B cable.
Note
The 4-pin mini Type B connector is easily confused with the 5-pin mini Type B connector. They are not
compatible. Only the 5-pin mini Type B connector can be used.
compatible. Only the 5-pin mini Type B connector can be used.
For operation with Microsoft Windows, the Cisco Windows USB console driver must be installed on any
PC connected to the console port. With this driver, you can plug and unplug the USB cable into and from
the console port without affecting Windows HyperTerminal operations.
PC connected to the console port. With this driver, you can plug and unplug the USB cable into and from
the console port without affecting Windows HyperTerminal operations.
Note
Only one console port can be active at a time. When a cable is plugged into the USB console port, the
RJ-45 port becomes inactive. Conversely, when the USB cable is removed from the USB port, the RJ-45
port becomes active.
RJ-45 port becomes inactive. Conversely, when the USB cable is removed from the USB port, the RJ-45
port becomes active.