Примечания к выпуску для Cisco Cisco 2000 Series Wireless LAN Controller
14
Release Notes for Cisco Wireless LAN Controllers and Lightweight Access Points for Release 3.2.171.6
OL-11567-02
Important Notes
2006 Image Not Supported for 3504 Controllers
The 2006 controller image is supported for use with only 2000 series controllers. Do not install the 2006
image on a 3504 controller. Otherwise, errors may occur. Install only the 3504 image on a 3504
controller.
image on a 3504 controller. Otherwise, errors may occur. Install only the 3504 image on a 3504
controller.
Running a 3504 Image on a 2000 Series Controller
It is possible to run a 3504 controller image on a 2000 series controller, but Cisco Aironet 1130, 1200,
and 1240 series access points will not be able to connect to the controller.
and 1240 series access points will not be able to connect to the controller.
Cisco Lightweight Access Points Fail to Join Cisco Controllers
When a Cisco lightweight access point is connected to a terminal server port and reboots because of a
join failure or timeout, this sequence repeats until the access point returns to the boot prompt and remains
there. This condition occurs when there is no telnet session to the access point’s console port and when
the controller is not responding to the access point’s join response.
join failure or timeout, this sequence repeats until the access point returns to the boot prompt and remains
there. This condition occurs when there is no telnet session to the access point’s console port and when
the controller is not responding to the access point’s join response.
Workaround: Disconnect the access point’s console port from the terminal server. Reprogram the
controller to have it respond to the access point’s join request. Power cycle the access point to force a
restart.
controller to have it respond to the access point’s join request. Power cycle the access point to force a
restart.
Upgrading External Web Authentication
When upgrading a controller from operating system release 2.0 or 2.2.127.4 to release 3.2.116.21 or
later, update the external web authentication configuration as follows:
later, update the external web authentication configuration as follows:
1.
Instead of using a preauthentication ACL, the network manager must configure the external web
server IP address using this command:
server IP address using this command:
config custom-web ext-webserver add index IP-address
Note
IP-address is the address of any web server that performs external web authentication.
2.
The network manager must use the new login_template shown here:
<html>
<head>
<meta http-equiv="Pragma" content="no-cache"> <meta HTTP-EQUIV=”Content-Type”
CONTENT="text/html; charset=iso-8859-1"> <title>Web Authentication</title> <script>
function submitAction(){
var link = document.location.href;
var searchString = "redirect=";
var equalIndex = link.indexOf(searchString);
var redirectUrl = "";
var urlStr = "";
if(equalIndex > 0) {
equalIndex += searchString.length;
urlStr = link.substring(equalIndex);
if(urlStr.length > 0){
redirectUrl += urlStr;
if(redirectUrl.length > 255)