Технические ссылки для Cisco Cisco 5760 Wireless LAN Controller

snmp-server enable traps vrfmib

To allow SNMP vrfmib traps, use the snmp-server enable traps vrfmib command in global configuration
mode. Use the no form of this command to return to the default setting.

snmp-server enable traps vrfmib [vnet-trunk-down | vnet-trunk-up | vrf-down | vrf-up]

no snmp-server enable traps vrfmib [vnet-trunk-down | vnet-trunk-up | vrf-down | vrf-up]

Syntax Description

(Optional) Enables vrfmib trunk down traps.

vnet-trunk-down

(Optional) Enables vrfmib trunk up traps.

vnet-trunk-up

(Optional) Enables vrfmib vrf down traps.

vrf-down

(Optional) Enables vrfmib vrf up traps.

vrf-up

Command Default

The sending of SNMP vrfmib traps is disabled.

Command Modes

Global configuration

Command History

Modification

Release

This command was introduced.

Cisco IOS XE 3.2SE

Usage Guidelines

Specify the host (NMS) that receives the traps by using the snmp-server host global configuration command.
If no trap types are specified, all trap types are sent.

Informs are not supported in SNMPv1.

Note

To enable more than one type of trap, you must enter a separate snmp-server enable traps command for
each trap type.

Examples

This example shows how to generate vrfmib trunk down traps:

Controller(config)#

snmp-server enable traps vrfmib vnet-trunk-down

Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)

972

OL-29471-01

snmp-server enable traps vrfmib