Технические ссылки для Cisco Cisco 5760 Wireless LAN Controller
seTX
Gi1/0/8
Gi1/0/8
notconnect
1
auto
auto 10/100/1000Ba
seTX
Gi1/0/9
Gi1/0/9
notconnect
1
auto
auto 10/100/1000Ba
seTX
Gi1/0/10
Gi1/0/10
notconnect
1
auto
auto 10/100/1000Ba
seTX
These are examples of output from the show interfaces status command for a specific interface when private
VLANs are configured. Port 22 is configured as a private-VLAN host port. It is associated with primary
VLAN 20 and secondary VLAN 25:
VLANs are configured. Port 22 is configured as a private-VLAN host port. It is associated with primary
VLAN 20 and secondary VLAN 25:
Controller#
show interfaces gigabitethernet1/0/22 status
Port
Name
Status
Vlan
Duplex
Speed
Type
Gi1/0/22
connected
20,25
a-full
a-100
10/100BaseTX
In this example, port 20 is configured as a private-VLAN promiscuous port. The display shows only the
primary VLAN 20:
primary VLAN 20:
Controller#
show interfaces gigabitethernet1/0/20 status
Port
Name
Status
Vlan
Duplex
Speed
Type
Gi1/0/20
connected
20
a-full
a-100
10/100BaseTX
This is an example of output from the show interfaces status err-disabled command. It displays the status
of interfaces in the error-disabled state:
of interfaces in the error-disabled state:
Controller#
show interfaces status err-disabled
Port
Name
Status
Reason
Gi1/0/2
err-disabled
gbic-invalid
Gi2/0/3
err-disabled
dtp-flap
This is an example of output from the show interfaces interface-id pruning command:
Controller#
show interfaces gigabitethernet1/0/2 pruning
Port Vlans pruned for lack of request by neighbor
This is an example of output from the show interfaces interface-id trunk command. It displays trunking
information for the port.
information for the port.
Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)
OL-29471-01
233
show interfaces